Electromagnetic Lock Power Supplies

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.

Altronix EoC hardened transceivers are designed to transmit data over Coax cables and provide power in a PoE / PoE+ compliant format to an enabled device / camera. These units feature a plug and play feature to facilitate hassle-free installation. Selected models can support up to two PoE or PoE+ cameras / devices or a single Hi-PoE (60W) device. They also feature built-in IP management for remote camera reset, monitoring and reporting via various IP protocols.

Altronix ReServ video surveillance UPS units are used as emergency power backup for running cameras during power outage, as well as maintaining camera synchronisation. These units feature a combination of multiple AC & DC PTC ports, producing true sine wave outputs rated 24VAC @ 4A and 12VDC @ 2A. They are equipped with rechargeable lead acid or gel batteries, a built-in charger and an automatic switchover feature to stand-by battery when AC fails. The LED indicators and audible alarm provide notification of failure / trouble.

Altronix open frame transformers are used to power heavy electronic equipment such as security, access control & surveillance devices. These step down transformers reduce voltage and increase amperage output proportionally. They are fitted inside steel angle frames for easy mounting on terminal blocks, rail terminals and stud connections. Choose from a wide range of these open frame transformers, also available with enclosure boxes for protection.

Altronix access power integration kits are designed to accommodate various combinations of CDVI Atrium A22K/A22NB/ADH10 boards for up to four doors in a single enclosure. These pre-assembled kits consist of Trove1 enclosures / backplanes with factory-installed Altronix power supplies / chargers and sub-assemblies. These units automatically switch over to a stand-by battery when AC power fails. There is zero voltage drop when the unit switches over to battery backup.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These units additionally provide automatic detection and protection of legacy non-PoE cameras. These midspans have 8 or 16 ports in a space-saving, 19 inch rack mount chassis to allow easy rack and shelf mounting. They feature easy plug and play installation for user convenience and LED indicators to convey port status.

Altronix 8-door software access and power integration kits consist of pre-assembled Trove1SH1R enclosure / backplane with factory installed power supplies / chargers & sub-assemblies. These access & power integration kits are capable of accommodating various software house board combinations up to 8 doors, in a single enclosure. These kits are integrated with built-in chargers for sealed lead acid or gel batteries and are capable of being operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL1012ULX Series power supplies are designed for converting a 115VAC, 60 Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies feature AC fail supervision to monitor voltage and an alarm to indicate failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switchover to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Linear power supplies / chargers from Altronix are designed to convert a low voltage AC input into a 12VDC or 24VDC output. They provide filtered and electronically regulated output. These units can limit overload and short circuit currents to provide thermal overload and short circuit protection. They come with a built-in charger for sealed lead acid or gel batteries. These units are integrated with LED indicators to show AC input and DC output.

Altronix NetWay midspans / injectors provide pass data & power for PoE compliant cameras or edge devices, located up to 100 meters. They also provide auto detection & protection to legacy, non-PoE devices. They are compatible with the brand's NetWayXT repeater modules for extending distance up to 600 meters and offer up to 30W volt full power per port. These UL-listed devices enable programming of port monitoring & PoE shutdown during LAN or laptop connections and feature illuminated master power disconnect, circuit breakers with manual reset switches for default settings. Further, they have LED ports for proper point-to-point functioning and allow Cat5 cables for ethernet connections up to a distance of 100 meters, ensuring high speed transfers. Choose from a wide range of these devices, available in 8 and 16 port variants.

Altronix NAC power extenders / supplies are cost-effective, voltage regulated, remote power extenders for notification appliance, circuit expansions and provide auxiliary power to support system accessories. They feature steel construction to reduce oxidation on the exposed surfaces and can connect to any 24V volt fire alarm control panel (FACP). These CE-approved extenders have 2-wire sync modes, allowing audible notification appliances (horns) and visual notification appliances (strobes) to be silenced or deactivated simultaneously. Additionally, they offer ground fall detections for preventing damage to the electrical components and the signal circuit, trouble memories help identify intermittent loop problems. These power supply devices utilise sealed, lead acid or gel type back up batteries for excellent heat conduction and the common trouble inputs or outputs for external, trouble signal tie-ins. These LED indicators turn on / off while carrying electricity and are available in 6, 8 & 10A output current ratings.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix 8-trigger access power controllers are used for converting one 12 to 24VAC/VDC input into eight independently controlled fuse protected outputs. They are ideal for powering electromagnetically controlled doors, locks and electric strikes. They are equipped with a red LED that indicates triggered outputs and a green LED which indicates triggered FACP disconnects. Choose from a wide range of 8-trigger access power controllers, available in steel and fibreglass variants.
Raptor Supplies also offers multi output access power controllers for controlling 4 trigger inputs.

Altronix access power controllers with power supplies / chargers are used for distributing power to access control systems and compatible accessories. These power controllers convert a 115VAC, 50 / 60Hz input into 16 independently controlled 12 or 24VDC controlled, fuse protected outputs. The outputs of these controllers are activated by normally closed or normally open dry trigger inputs from an access control system, PIR, card reader, keypad or push butto. They can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can withstand temperatures ranging from 32 to 120 degrees F.

Altronix battery shelves allow the addition of two 12VDC / 12 AH batteries to enclosures, bringing the the total up to four 12VDC / 12 AH batteries. These units feature steel construction for handling high temperatures and offering excellent corrosion resistance. They are ideal for Altronix BC400G and BC400R power supply / battery enclosures.

Altronix ACM Series power supplies / chargers are ideal for switching and distributing power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form C-contacts and are activated by open collector sinks or open dry trigger inputs from card readers, access control systems, push button and keypads. They route power to a variety of access control hardware devices including mag locks and magnetic door holders. The outputs operate in both Fail-Safe and Fail-Secure modes for an adjustable voltage output. The FACP (fire alarm control panel) interfaces enable emergency egress, alarm monitoring & to trigger other auxiliary devices. The fire alarm disconnects are individually selectable for any or all of the eight outputs along with relay indicators to prevent overvoltages & overcurrent faults.