Electromagnetic Lock Power Supplies

Altronix linear power supplies / chargers are ideal for access control and security applications. They convert a 115VAC, 50 / 60Hz input to a 12VDC, 2.5A, filtered & electronically regulated output. These power supplies / chargers facilitate automatic switching over to the stand-by battery in case of AC failure, and can be operated at temperatures ranging from 0 to 49 degrees C. The built-in charger stores gel or sealed lead acid batteries and ensures thermal overload & short circuit protection. Variants are available in enclosure heights of 12 and 15.5 inches.

Linear power supplies / chargers from Altronix are designed to convert a low voltage AC input into a 12VDC or 24VDC output. They provide filtered and electronically regulated output. These units can limit overload and short circuit currents to provide thermal overload and short circuit protection. They come with a built-in charger for sealed lead acid or gel batteries. These units are integrated with LED indicators to show AC input and DC output.

Altronix NetWay midspans / injectors provide pass data & power for PoE compliant cameras or edge devices, located up to 100 meters. They also provide auto detection & protection to legacy, non-PoE devices. They are compatible with the brand's NetWayXT repeater modules for extending distance up to 600 meters and offer up to 30W volt full power per port. These UL-listed devices enable programming of port monitoring & PoE shutdown during LAN or laptop connections and feature illuminated master power disconnect, circuit breakers with manual reset switches for default settings. Further, they have LED ports for proper point-to-point functioning and allow Cat5 cables for ethernet connections up to a distance of 100 meters, ensuring high speed transfers. Choose from a wide range of these devices, available in 8 and 16 port variants.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix sensitive relay modules are ideal for continuous duty operations in handling switching applications. They feature phenolic material to withstand humidity & high temperatures or have fiberglass construction, providing electrical insulation with chemical resistance. Choose from a wide range of these modules, operating on temperatures ranging from -25 degrees Celsius to 55 degrees Celsius and are available in widths of 1.9 & 2.75 inches.

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix 8-trigger access power controllers are used for converting one 12 to 24VAC/VDC input into eight independently controlled fuse protected outputs. They are ideal for powering electromagnetically controlled doors, locks and electric strikes. They are equipped with a red LED that indicates triggered outputs and a green LED which indicates triggered FACP disconnects. Choose from a wide range of 8-trigger access power controllers, available in steel and fibreglass variants.
Raptor Supplies also offers multi output access power controllers for controlling 4 trigger inputs.

Altronix access power controllers with power supplies / chargers are used for distributing power to access control systems and compatible accessories. These power controllers convert a 115VAC, 50 / 60Hz input into 16 independently controlled 12 or 24VDC controlled, fuse protected outputs. The outputs of these controllers are activated by normally closed or normally open dry trigger inputs from an access control system, PIR, card reader, keypad or push butto. They can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can withstand temperatures ranging from 32 to 120 degrees F.

Altronix battery shelves allow the addition of two 12VDC / 12 AH batteries to enclosures, bringing the the total up to four 12VDC / 12 AH batteries. These units feature steel construction for handling high temperatures and offering excellent corrosion resistance. They are ideal for Altronix BC400G and BC400R power supply / battery enclosures.

Altronix siren drivers are used with alarm panels having limited current capacities. These siren drivers feature steady or yelp channel operation to deliver high output while consuming very low current draw. They offer relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from - 13 to 131 degrees F. These siren drivers feature phenolic / fibreglass construction for high mechanical strength & corrosion resistance, and are available in lengths of 1.75 & 2.75 inches.

Altronix 24 hour 365 day event timers are designed for security, access control, home & building automation, and lighting control applications. These timers are integrated with independently controlled form C relay contacts to provide latching & momentary operations during a programmed schedule. They feature an EE Prom memory that prevents loss of programming in case of power failure. They have block programming capacity of accommodating a total of 350 events per week. These timers are made of steel / phenolic / fibreglass for high mechanical strength & corrosion resistance, and can be operated at temperatures ranging from -20 to 49 degrees C.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronic video balun / combiners are UL listed accessories used to transmit video, data & power to 24VAC fixed or PTZ indoor / outdoor cameras. These units are compatible with HubWay and HubSat UTP transceiver hubs, for use with 24VAC cameras. These units feature a green power LED indicator to inform about the unit's running status. They are made of plastic and can handle temperatures ranging from 32 to 120 degrees Fahrenheit.