Shaft Collars
Shaft collars are ring-shaped components that secure and enclose shafts in machining applications. They serve three main purposes holding, positioning and providing a point of contact
...Read moreStyle | Model | Collar Size | Inside Dia. | Price (ex. VAT) | |
---|---|---|---|---|---|
A | 1025-P | €6.19 | |||
A | 1025SS-P | €17.67 | RFQ | ||
A | 5111-P | €14.38 | RFQ | ||
A | 5061-p | €17.19 | RFQ | ||
A | 4252SS-P | €10.61 | RFQ | ||
A | 4252-P | €3.30 | RFQ | ||
A | 1850SS-P | €27.34 | RFQ | ||
A | 1850-p | €7.18 | RFQ | ||
A | 16SS-P | €33.59 | RFQ | ||
A | 16-p | €7.28 | |||
A | 15SS-P | €28.30 | RFQ | ||
A | 1195-P | €58.10 | |||
A | 1035SS-P | €17.67 | |||
A | 1035-P | €6.19 | |||
A | 570-P | €17.09 | |||
A | 5153-P | €53.20 | RFQ | ||
A | 2138-p | €10.22 | RFQ |
Shaft Collars for D Shafts
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | CLD-6-SS | €80.47 | |
B | MSPD-10-A | €93.59 | |
C | SPD-12-A | €91.84 | |
D | SPD-6-SS | €95.65 | |
C | SPD-6-A | €87.82 | |
E | SPD-6-F | €58.65 | |
D | SPD-10-SS | €116.46 | |
C | SPD-10-A | €93.27 | |
E | SPD-10-F | €69.24 | |
F | MSPD-10-SS | €116.84 | |
G | MSPD-10-F | €75.59 | |
C | SPD-8-A | €88.25 | |
B | MSPD-12-A | €97.72 | |
G | MSPD-12-F | €79.14 | |
F | MSPD-20-SS | €150.13 | |
B | MSPD-20-A | €112.60 | |
G | MSPD-20-F | €91.43 | |
B | MSPD-25-A | €128.59 | |
G | MSPD-25-F | €103.75 | |
F | MSPD-12-SS | €133.45 | |
C | SPD-4-A | €72.10 | |
C | SPD-16-A | €101.80 | |
F | MSPD-25-SS | €153.73 | |
H | CLD-10-F | €63.79 | |
I | CLD-16-A | €90.16 |
SP Series Shaft Collars
Ruland Manufacturing SP Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These 2-piece, clamp-style collars are easy to install & remove, and are held in place via 2 set screws while distributing the clamping force evenly. They are REACH & RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel, 316 stainless steel, 2024 aluminium, 1215 lead-free steel and acetal plastic variants.
Ruland Manufacturing SP Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These 2-piece, clamp-style collars are easy to install & remove, and are held in place via 2 set screws while distributing the clamping force evenly. They are REACH & RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel, 316 stainless steel, 2024 aluminium, 1215 lead-free steel and acetal plastic variants.
Style | Model | Outside Dia. | Bore Dia. | Cap Screw Size | Screw Material | Screw Size | Width | Withstand Temp. | Clearance Dia. | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | SP-10-F | €22.95 | |||||||||
B | SP-10-A | €29.22 | |||||||||
C | SP-10-SS | €53.22 | |||||||||
D | SP-10-ST | €124.24 | |||||||||
C | SP-12-SS | €56.98 | |||||||||
B | SP-12-A | €31.60 | |||||||||
A | SP-12-F | €27.28 | |||||||||
D | SP-12-ST | €147.06 | |||||||||
C | SP-9-SS | €52.61 | |||||||||
B | SP-9-A | €29.81 | |||||||||
A | SP-9-F | €21.23 | |||||||||
A | SP-15-F | €31.65 | |||||||||
B | SP-15-A | €36.73 | |||||||||
C | SP-15-SS | €79.25 | |||||||||
A | SP-16-F | €29.32 | |||||||||
D | SP-16-ST | €181.63 | |||||||||
C | SP-16-SS | €68.88 | |||||||||
B | SP-16-A | €34.88 | |||||||||
D | SP-8-ST | €105.39 | |||||||||
B | SP-8-A | €26.36 | |||||||||
A | SP-8-F | €21.23 | |||||||||
C | SP-8-SS | €42.05 | |||||||||
A | SP-11-F | €26.60 | |||||||||
C | SP-11-SS | €60.90 | |||||||||
B | SP-11-A | €33.65 |
D Bore Shaft Collars, SPD Series
Two-piece shaft collars from Ruland Manufacturing feature D-bores to mate to D-shafting for allowing maximum holding power. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit & alignment. The forged screws test beyond ANSI standards, offering maximum holding power. These RoHS 3 and REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction for increased holding power. They can handle operating temperatures ranging between -40 and 350 deg Fahrenheit.
Two-piece shaft collars from Ruland Manufacturing feature D-bores to mate to D-shafting for allowing maximum holding power. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit & alignment. The forged screws test beyond ANSI standards, offering maximum holding power. These RoHS 3 and REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction for increased holding power. They can handle operating temperatures ranging between -40 and 350 deg Fahrenheit.
Shaft Collars, SPH Series
Ruland Manufacturing SPH Series two-piece shaft collars are designed for guiding, spacing, stopping, mounting & component alignment. They have a clamp style design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit and alignment. The forged screws test beyond ANSI standards, offering maximum holding power. These RoHS 3 and REACH compliant units feature 1215 lead-free steel construction with black oxide finish for increased holding power & corrosion resistance. They can operate at temperatures ranging between -40 and 350 deg Fahrenheit.
Ruland Manufacturing SPH Series two-piece shaft collars are designed for guiding, spacing, stopping, mounting & component alignment. They have a clamp style design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit and alignment. The forged screws test beyond ANSI standards, offering maximum holding power. These RoHS 3 and REACH compliant units feature 1215 lead-free steel construction with black oxide finish for increased holding power & corrosion resistance. They can operate at temperatures ranging between -40 and 350 deg Fahrenheit.
Style | Model | Bore Dia. | Clearance Dia. | Outside Dia. | Price (ex. VAT) | |
---|---|---|---|---|---|---|
A | SPH-49-F | €595.31 | ||||
A | SPH-53-F | €617.24 | ||||
A | SPH-57-F | €723.17 | ||||
A | SPH-59-F | €746.83 | ||||
A | SPH-61-F | €845.52 | ||||
A | SPH-63-F | €725.55 | ||||
A | SPH-56-F | €541.61 | ||||
A | SPH-52-F | €597.21 | ||||
A | SPH-60-F | €758.69 | ||||
A | SPH-50-F | €595.31 | ||||
A | SPH-51-F | €595.31 | ||||
A | SPH-54-F | €599.76 | ||||
A | SPH-55-F | €588.80 | ||||
A | SPH-58-F | €815.71 | ||||
A | SPH-62-F | €740.29 | ||||
A | SPH-64-F | €767.03 | ||||
A | SPH-65-F | €844.41 | ||||
A | SPH-69-F | €1,083.63 | ||||
A | SPH-73-F | €1,021.26 | ||||
A | SPH-75-F | €1,096.70 | ||||
A | SPH-77-F | €1,233.13 | ||||
A | SPH-79-F | €1,164.18 | ||||
A | SPH-72-F | €867.07 | ||||
A | SPH-68-F | €976.71 | ||||
A | SPH-76-F | €1,096.70 |
Two Piece Shaft Collars, SPK Series
Ruland Manufacturing offers two-piece shaft collars for guiding, spacing, stopping, mounting & component alignment. These units feature a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. They have a keyway to prevent slippage on the shaft when the shaft collar is used for positive drive. The forged screws test beyond ANSI standards, offering maximum holding power. They are RoHS 3 & REACH compliant and come with mated halves to offer a proper fit & alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power.
Ruland Manufacturing offers two-piece shaft collars for guiding, spacing, stopping, mounting & component alignment. These units feature a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. They have a keyway to prevent slippage on the shaft when the shaft collar is used for positive drive. The forged screws test beyond ANSI standards, offering maximum holding power. They are RoHS 3 & REACH compliant and come with mated halves to offer a proper fit & alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power.
Style | Model | Width | Bore Dia. | Clearance Dia. | Material | Operating Temp. Range | Outside Dia. | Screw Material | Screw Size | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | SPK-20-F | €65.64 | |||||||||
B | SPK-12-A | €59.87 | |||||||||
A | SPK-12-F | €54.82 | |||||||||
C | SPK-12-SS | €101.12 | |||||||||
B | SPK-16-A | €62.29 | |||||||||
A | SPK-16-F | €59.65 | |||||||||
C | SPK-16-SS | €117.79 | |||||||||
B | SPK-20-A | €79.30 | |||||||||
C | SPK-20-SS | €136.09 | |||||||||
C | SPK-39-SS | €452.73 | |||||||||
C | SPK-35-SS | €408.69 | |||||||||
B | SPK-39-A | €179.22 | |||||||||
A | SPK-39-F | €132.24 | |||||||||
A | SPK-35-F | €110.37 | |||||||||
B | SPK-35-A | €186.49 | |||||||||
A | SPK-10-F | €51.30 | |||||||||
C | SPK-10-SS | €94.35 | |||||||||
B | SPK-10-A | €57.44 | |||||||||
C | SPK-24-SS | €165.59 | |||||||||
A | SPK-24-F | €73.74 | |||||||||
B | SPK-24-A | €89.30 | |||||||||
A | SPK-28-F | €79.22 | |||||||||
C | SPK-32-SS | €308.78 | |||||||||
A | SPK-32-F | €113.54 | |||||||||
B | SPK-32-A | €109.95 |
TCL Series Shaft Collars
Ruland Manufacturing TCL Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These one-piece, clamp-style collars are easy to install & remove, and are held in place via set screws while distributing the clamping force evenly. They are REACH and RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel and 1215 lead-free steel variants on Raptor Supplies.
Ruland Manufacturing TCL Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These one-piece, clamp-style collars are easy to install & remove, and are held in place via set screws while distributing the clamping force evenly. They are REACH and RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel and 1215 lead-free steel variants on Raptor Supplies.
Style | Model | Screw Size | Bore Dia. | Clearance Dia. | Set Screw Size | Width | Finish | Inside Dia. | Material | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | TCL-4-28-F | €15.04 | |||||||||
B | TCL-3-32-F | €18.06 | |||||||||
A | TCL-4-20-F | €15.47 | |||||||||
A | TCL-5-24-F | €15.39 | |||||||||
B | TCL-2-32-F | €18.06 | |||||||||
A | TCL-5-18-F | €15.39 | |||||||||
B | TCL-3-24-F | €18.06 | |||||||||
C | TCL-3-24-SS | €33.78 | |||||||||
C | TCL-2-32-SS | €35.78 | |||||||||
C | TCL-3-32-SS | €35.78 | |||||||||
D | TCL-4-20-SS | €26.57 | |||||||||
D | TCL-4-28-SS | €28.75 | |||||||||
D | TCL-5-18-SS | €31.56 | |||||||||
D | TCL-5-24-SS | €29.75 | |||||||||
D | TCL-7-20-SS | €37.81 | |||||||||
A | TCL-7-20-F | €19.06 | |||||||||
A | TCL-7-14-F | €17.99 | |||||||||
A | TCL-6-24-F | €16.60 | |||||||||
A | TCL-6-16-F | €16.55 | |||||||||
D | TCL-6-16-SS | €33.62 | |||||||||
D | TCL-6-24-SS | €33.62 | |||||||||
D | TCL-7-14-SS | €40.29 | |||||||||
D | TCL-8-20-SS | €42.01 | |||||||||
A | TCL-8-20-F | €19.72 | |||||||||
A | TCL-8-13-F | €19.92 |
Threaded Shaft Collars, TSP Series
Ruland Manufacturing threaded, two-piece shaft collars have higher axial holding power than round bore shaft collars of a similar size. They are well suited for guiding, spacing, stopping, mounting & component alignment. These units feature double-tapped threads to ensure a precise and burr-free finish that allows easy installation & removal, and a proper fit. These RoHS 3 & REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction to offer increased holding power and handle operating temperatures ranging between -40 and 350 deg Fahrenheit. They come with forged screws that test beyond ANSI standards, offering maximum holding power.
Ruland Manufacturing threaded, two-piece shaft collars have higher axial holding power than round bore shaft collars of a similar size. They are well suited for guiding, spacing, stopping, mounting & component alignment. These units feature double-tapped threads to ensure a precise and burr-free finish that allows easy installation & removal, and a proper fit. These RoHS 3 & REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction to offer increased holding power and handle operating temperatures ranging between -40 and 350 deg Fahrenheit. They come with forged screws that test beyond ANSI standards, offering maximum holding power.
Style | Model | Bore Dia. | Clearance Dia. | Material | Outside Dia. | Screw Material | Screw Size | Width | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|
A | TSP-2-32-SS | €54.52 | ||||||||
B | TSP-2-32-F | €29.75 | ||||||||
A | TSP-3-24-SS | €57.81 | ||||||||
B | TSP-3-24-F | €29.75 | ||||||||
A | TSP-3-32-SS | €57.81 | ||||||||
B | TSP-3-32-F | €29.75 | ||||||||
A | TSP-16-14-SS | €111.44 | ||||||||
B | TSP-16-8-F | €52.68 | ||||||||
B | TSP-16-14-F | €48.01 | ||||||||
A | TSP-16-12-SS | €99.26 | ||||||||
B | TSP-16-12-F | €49.37 | ||||||||
A | TSP-16-8-SS | €122.33 | ||||||||
A | TSP-24-6-SS | €173.85 | ||||||||
B | TSP-24-6-F | €76.79 | ||||||||
B | TSP-24-12-F | €81.52 | ||||||||
A | TSP-24-12-SS | €192.83 | ||||||||
B | TSP-20-7-F | €77.07 | ||||||||
A | TSP-20-7-SS | €167.42 | ||||||||
B | TSP-20-12-F | €63.48 | ||||||||
A | TSP-20-12-SS | €141.23 | ||||||||
A | TSP-28-16-SS | €368.95 | ||||||||
B | TSP-28-16-F | €102.35 | ||||||||
B | TSP-18-12-F | €69.77 | ||||||||
B | TSP-18-7-F | €69.77 | ||||||||
A | TSP-18-12-SS | €160.04 |
Double Wide Shaft Collars, WCL Series
Ruland Manufacturing one-piece, double-wide shaft collars have higher axial holding power than a round bore of equivalent size. They are ideal for guiding, spacing, stopping, mounting & component alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power. The clamp design does not mar the shaft, is easy to remove and allows indefinite adjustments. They are equipped with forged screws that test beyond DIN 912 12.9 standards to offer maximum holding power. All units are stamped with bore size for easy identification.
Ruland Manufacturing one-piece, double-wide shaft collars have higher axial holding power than a round bore of equivalent size. They are ideal for guiding, spacing, stopping, mounting & component alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power. The clamp design does not mar the shaft, is easy to remove and allows indefinite adjustments. They are equipped with forged screws that test beyond DIN 912 12.9 standards to offer maximum holding power. All units are stamped with bore size for easy identification.
Style | Model | Width | Bore Dia. | Clearance Dia. | Material | Operating Temp. Range | Outside Dia. | Screw Material | Screw Size | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | WCL-8-SS | €132.89 | |||||||||
A | WCL-2-SS | €115.46 | |||||||||
B | WCL-14-F | €102.80 | |||||||||
A | WCL-12-SS | €190.05 | |||||||||
B | WCL-20-F | €124.33 | |||||||||
B | WCL-8-F | €53.52 | |||||||||
B | WCL-28-F | €281.61 | |||||||||
B | WCL-5-F | €50.61 | |||||||||
C | WCL-2-A | €66.75 | |||||||||
B | WCL-3-F | €55.43 | |||||||||
B | WCL-18-F | €134.78 | |||||||||
B | WCL-32-F | €424.03 | |||||||||
B | WCL-2-F | €58.24 | |||||||||
A | WCL-28-SS | €708.32 | |||||||||
A | WCL-24-SS | €505.18 | |||||||||
A | WCL-32-SS | €834.72 | |||||||||
A | WCL-18-SS | €296.87 | |||||||||
A | WCL-16-SS | €247.75 | |||||||||
A | WCL-14-SS | €252.56 | |||||||||
B | WCL-16-F | €94.97 | |||||||||
A | WCL-5-SS | €111.12 | |||||||||
A | WCL-6-SS | €105.56 | |||||||||
B | WCL-6-F | €47.60 | |||||||||
B | WCL-4-F | €42.59 | |||||||||
C | WCL-6-A | €51.90 |
Double Wide Shaft Collars, WSP Series
Two-piece, double wide shaft collars from Ruland Manufacturing are used for guiding, spacing, stopping, mounting & component alignment. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit and alignment. These units are constructed using 1215 lead-free steel / 303 stainless steel to offer increased holding power and corrosion resistance. They are RoHS 3 & REACH compliant, and feature forged screws that are tested beyond DIN 912 12.9 standards to ensure maximum holding power. All units are stamped with bore size for easy identification.
Two-piece, double wide shaft collars from Ruland Manufacturing are used for guiding, spacing, stopping, mounting & component alignment. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit and alignment. These units are constructed using 1215 lead-free steel / 303 stainless steel to offer increased holding power and corrosion resistance. They are RoHS 3 & REACH compliant, and feature forged screws that are tested beyond DIN 912 12.9 standards to ensure maximum holding power. All units are stamped with bore size for easy identification.
Style | Model | Bore Dia. | Clearance Dia. | Material | Outside Dia. | Screw Material | Screw Size | Width | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|
A | WSP-16-F | €128.16 | ||||||||
B | WSP-16-SS | €279.67 | ||||||||
B | WSP-24-SS | €856.59 | ||||||||
A | WSP-24-F | €241.46 | ||||||||
B | WSP-20-SS | €508.30 | ||||||||
A | WSP-20-F | €241.03 | ||||||||
B | WSP-28-SS | €955.51 | ||||||||
A | WSP-28-F | €366.79 | ||||||||
A | WSP-18-F | €220.32 | ||||||||
B | WSP-18-SS | €460.24 | ||||||||
A | WSP-8-F | €85.39 | ||||||||
B | WSP-8-SS | €190.08 | ||||||||
A | WSP-4-F | €93.86 | ||||||||
B | WSP-4-SS | €112.93 | ||||||||
A | WSP-2-F | €121.02 | ||||||||
B | WSP-2-SS | €121.49 | ||||||||
A | WSP-32-F | €423.04 | ||||||||
B | WSP-32-SS | €1,422.01 | ||||||||
A | WSP-12-F | €113.47 | ||||||||
B | WSP-12-SS | €282.80 | ||||||||
A | WSP-6-F | €87.93 | ||||||||
B | WSP-6-SS | €198.15 | ||||||||
B | WSP-3-SS | €157.34 | ||||||||
A | WSP-3-F | €102.16 | ||||||||
A | WSP-10-F | €112.12 |
Cam Lever Quick Clamping Shaft Collars
Heavy Duty Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | MSPH-105-SS | €3,451.00 | |
A | MSPH-120-SS | €3,732.46 | |
A | MSPH-90-SS | €2,819.24 | |
B | SPH-55-SS | €2,841.36 | |
C | SPH-48-F | €737.89 | |
B | SPH-72-SS | €3,716.53 | |
B | SPH-68-SS | €3,470.26 | |
B | SPH-71-SS | €3,716.53 | |
B | SPH-64-SS | €2,967.68 | |
B | SPH-84-SS | €4,426.22 | |
B | SPH-94-SS | €5,458.91 | |
B | SPH-87-SS | €4,770.62 |
QCL Series Shaft Collars
Ruland Manufacturing QCL Series shaft collars are designed to secure components over shafts, correct misalignment and dampen vibrations. These quick clamps have a balanced one piece design & lightweight construction for low inertia. They feature a stainless steel screw and a locking clip for quick & easy installation over the shaft. They are REACH & RoHS 2 compliant for safe operation. Choose from a wide range of shaft collars, available in M3, M4 and M5 cap screw sizes on Raptor Supplies.
Ruland Manufacturing QCL Series shaft collars are designed to secure components over shafts, correct misalignment and dampen vibrations. These quick clamps have a balanced one piece design & lightweight construction for low inertia. They feature a stainless steel screw and a locking clip for quick & easy installation over the shaft. They are REACH & RoHS 2 compliant for safe operation. Choose from a wide range of shaft collars, available in M3, M4 and M5 cap screw sizes on Raptor Supplies.
Style | Model | Screw Size | Bore Dia. | Cap Screw Size | Width | Clearance Dia. | Inside Dia. | Material | Outside Dia. | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | QCL-6-A | €76.01 | |||||||||
A | QCL-8-A | €75.99 | |||||||||
A | QCL-4-A | €69.64 | |||||||||
A | QCL-10-A | €75.96 | |||||||||
A | QCL-18-A | €92.86 | |||||||||
A | QCL-12-A | €94.21 | |||||||||
A | QCL-16-A | €97.24 | |||||||||
A | QCL-22-A | €147.70 | |||||||||
A | QCL-24-A | €152.43 | |||||||||
A | QCL-20-A | €146.27 | |||||||||
A | QCL-48-A | €275.97 | |||||||||
A | QCL-44-A | €275.97 | |||||||||
A | QCL-40-A | €275.97 | |||||||||
A | QCL-28-A | €223.29 | |||||||||
A | QCL-32-A | €242.78 | |||||||||
A | QCL-38-A | €275.97 | |||||||||
A | QCL-42-A | €229.58 | |||||||||
A | QCL-46-A | €249.76 | |||||||||
A | QCL-36-A | €228.15 | |||||||||
A | QCL-30-A | €223.29 | |||||||||
A | QCL-26-A | €223.29 |
Mountable Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | OF-MCL-24E-AN | €160.83 | |
A | OF-MCL-30-AN | €127.26 | |
B | FHT-MCL-32-AN | €118.63 | |
C | OF-MSP-30-SS | €154.41 | |
D | OF-MCL-30-SS | €124.51 | |
E | FHT-MCL-30-SS | €116.20 | |
F | FHD-MCL-30-SS | €114.14 | |
G | FHT-MCL-30-F | €47.96 | |
H | FHD-MCL-30-F | €47.12 | |
I | OF-MCL-30-F | €51.41 | |
B | FHT-MCL-30-AN | €118.63 | |
J | FHD-MCL-30-AN | €116.52 | |
K | OF-MCL-30-A | €67.34 | |
L | FHT-MCL-32-F | €47.96 | |
M | OF-MSP-30-AN | €152.35 | |
N | OF-MSP-30-A | €84.81 | |
C | OF-MSP-6E-SS | €127.53 | |
D | OF-MCL-6E-SS | €89.57 | |
E | FHT-MCL-6E-SS | €59.98 | |
O | OF-SP-6-SS | €68.50 | |
G | FHT-MCL-6E-F | €29.38 | |
H | FHD-MCL-6E-F | €28.86 | |
P | OF-MSP-6E-F | €77.66 | |
Q | OF-SP-6-F | €36.84 | |
J | FHD-MCL-32-AN | €116.52 |
Clamping Lever Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | LVO-MSP-24E-F | €149.71 | |
B | LV-MSP-55-F | €230.23 | |
C | LV-MCL-25-P | €133.35 | |
D | LVO-MCL-25-P | €133.35 | |
E | LVO-MSP-25-P | €152.14 | |
D | LV-MSP-25-A | €137.21 | |
D | LV-MCL-25-AN | €152.89 | |
D | LV-MCL-25-A | €125.73 | |
D | LV-MSP-25-AN | €149.17 | |
D | LVO-MSP-25-A | €137.21 | |
D | LVO-MCL-25-AN | €152.89 | |
F | LV-MSP-54-A | €269.93 | |
G | LV-MCL-55-F | €212.65 | |
H | LVO-MCL-25-ST | €259.29 | |
I | LV-MCL-55-SS | €471.24 | |
J | LV-MSP-55-SS | €499.67 | |
F | LV-MSP-55-A | €269.93 | |
B | LV-MSP-60-F | €242.87 | |
D | LV-MCL-60-F | €227.42 | |
I | LV-MCL-60-SS | €480.04 | |
F | LV-MSP-60-A | €281.78 | |
B | LV-MSP-65-F | €301.11 | |
G | LV-MCL-65-F | €263.74 | |
J | LV-MSP-65-SS | €680.51 | |
D | LV-MSP-25-P | €152.14 |
Mountable Clamping Lever Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | LV-OF-MSP-24E-AN | €303.92 | |
B | LV-OF-MCL-35-A | €177.23 | |
C | LV-OF-MCL-30-SS | €221.02 | |
D | LV-OF-MSP-30-SS | €250.92 | |
E | LVO-OF-MSP-30-SS | €250.92 | |
A | LV-OF-MSP-35-AN | €280.78 | |
F | LV-OF-MCL-35-AN | €245.10 | |
G | LVO-OF-MSP-35-AN | €280.78 | |
H | LVO-OF-MCL-35-AN | €245.10 | |
I | LVO-OF-MCL-35-A | €177.23 | |
J | LV-OF-MSP-35-F | €174.74 | |
K | LVO-OF-MSP-30-F | €159.29 | |
F | LV-OF-MCL-35-F | €158.54 | |
K | LVO-OF-MSP-35-F | €174.74 | |
L | LVO-OF-MCL-35-SS | €251.29 | |
C | LV-OF-MCL-35-SS | €251.29 | |
G | LVO-OF-MSP-40-AN | €291.15 | |
H | LVO-OF-MCL-40-AN | €248.18 | |
A | LV-OF-MSP-40-AN | €291.15 | |
I | LVO-OF-MCL-40-A | €181.68 | |
B | LV-OF-MCL-40-A | €181.68 | |
L | LVO-OF-MCL-30-SS | €221.02 | |
M | LVO-OF-MCL-30-F | €147.90 | |
J | LV-OF-MSP-40-F | €178.46 | |
E | LVO-OF-MSP-12E-SS | €301.38 |
One Piece Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | MCL-16E-P | €44.47 | |
B | MCL-19E-AN | €90.52 | |
C | MCL-25E-F | €40.50 | |
C | MCL-13E-F | €24.30 | |
C | MCL-17E-F | €30.33 | |
D | MCL-24E-FZ | €55.79 | |
D | MCL-23E-FZ | €56.85 | |
B | MCL-24E-AN | €101.96 | |
E | MCL-21E-SS | €102.75 | |
E | MCL-29E-ST | €349.02 | |
D | MCL-17E-FZ | €45.26 | |
E | MCL-19E-ST | €244.36 | |
D | MCL-22E-FZ | €56.27 | |
B | MCL-15E-AN | €62.84 | |
F | MCL-17E-P | €62.37 | |
D | MCL-15E-FZ | €42.36 | |
E | MCL-20E-SS | €99.69 | |
E | MCL-19E-SS | €91.52 | |
B | MCL-28E-AN | €179.89 | |
C | MCL-20E-F | €34.19 | |
C | MCL-36E-F | €121.76 | |
C | MCL-47E-F | €198.72 | |
B | MCL-30E-AN | €205.07 | |
E | MCL-27E-SS | €286.82 | |
C | MCL-26E-F | €74.59 |
Thin Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | ENCL60-16-SS | €159.48 | |
B | ENSP45-16MM-SS | €96.48 | |
B | ENSP35-12MM-SS | €82.96 | |
C | ENSP30-12MM-A | €39.53 | |
B | ENSP30-12MM-SS | €71.45 | |
C | ENSP25-14MM-A | €39.21 | |
B | ENSP25-14MM-SS | €62.72 | |
C | ENSP30-14MM-A | €38.34 | |
C | ENSP35-14MM-A | €45.94 | |
C | ENSP30-15MM-A | €40.61 | |
B | ENSP30-15MM-SS | €73.10 | |
C | ENSP35-15MM-A | €45.94 | |
B | ENSP35-15MM-SS | €90.46 | |
C | ENSP35-16MM-A | €45.94 | |
C | ENSP25-12MM-A | €34.05 | |
B | ENSP35-16MM-SS | €93.40 | |
B | ENSP30-16MM-SS | €74.56 | |
C | ENSP30-16MM-A | €38.64 | |
C | ENSP45-20MM-A | €48.31 | |
B | ENSP45-20MM-SS | €96.48 | |
C | ENSP35-20MM-A | €45.60 | |
C | ENSP45-24MM-A | €51.20 | |
B | ENSP45-24MM-SS | €96.48 | |
B | ENSP45-25MM-SS | €92.10 | |
C | ENSP45-25MM-A | €51.20 |
Shaft Collars for Threaded Shafts
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | TSP-28-16-SS-LH | €404.13 | |
B | TCL-24-12-F-LH | €67.65 | |
C | TCL-18-12-SS-LH | €120.81 | |
C | TCL-20-7-SS-LH | €124.35 | |
C | TCL-20-12-SS-LH | €124.35 | |
B | TCL-20-12-F-LH | €54.20 | |
B | TCL-20-7-F-LH | €54.20 | |
B | TCL-22-12-F-LH | €64.68 | |
B | TCL-22-6-F-LH | €64.68 | |
B | TCL-24-6-F-LH | €67.65 | |
C | TCL-24-12-SS-LH | €182.59 | |
C | TCL-24-6-SS-LH | €181.16 | |
B | TCL-18-7-F-LH | €46.37 | |
B | TCL-28-16-F-LH | €109.37 | |
C | TCL-28-16-SS-LH | €340.02 | |
B | TCL-32-12-F-LH | €119.79 | |
C | TCL-32-12-SS-LH | €375.91 | |
B | TCL-36-12-F-LH | €148.01 | |
A | TSP-4-20-SS-LH | €61.51 | |
A | TSP-2-32-SS-LH | €63.00 | |
A | TSP-3-32-SS-LH | €63.00 | |
A | TSP-3-24-SS-LH | €63.00 | |
A | TSP-4-28-SS-LH | €61.51 | |
B | TCL-18-12-F-LH | €46.37 | |
C | TCL-18-7-SS-LH | €120.81 |
Two Piece Shaft Collars
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | MSP-16E-TI | €1,528.36 | |
B | SPB-25-A | €88.78 | |
B | SPB-2-A | €29.17 | |
C | SPB-8-ST | €123.44 | |
C | SPB-4-ST | €81.63 | |
C | SPB-8-SS | €53.41 | |
C | SPB-4-SS | €34.89 | |
B | SPB-4-A | €26.68 | |
B | SPB-8-A | €31.17 | |
C | SPB-16-ST | €199.20 | |
C | SPB-16-SS | €89.94 | |
D | SPB-16-F | €32.76 | |
C | SPB-25-SS | €182.68 | |
C | SPB-30-SS | €346.74 | |
C | SPB-2-SS | €38.27 | |
B | SPB-30-A | €128.37 | |
C | SPB-23-SS | €143.68 | |
D | SPB-23-F | €46.26 | |
B | SPB-23-A | €62.21 | |
C | SPB-26-SS | €288.99 | |
D | SPB-26-F | €78.45 | |
B | SPB-26-A | €109.06 | |
C | SPB-21-SS | €151.87 | |
D | SPB-21-F | €47.33 | |
B | SPB-21-A | €62.21 |
CL Series Shaft Collars
Style | Model | Outside Dia. | Bore Dia. | Cap Screw Size | Screw Material | Screw Size | Width | Withstand Temp. | Clearance Dia. | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | CL-10-ST | €94.13 | |||||||||
B | CL-10-F | €15.29 | |||||||||
C | CL-10-A | €17.91 | |||||||||
D | CL-10-SS | €37.32 | |||||||||
C | CL-12-A | €21.11 | |||||||||
B | CL-12-F | €16.98 | |||||||||
A | CL-12-ST | €103.29 | |||||||||
D | CL-12-SS | €45.99 | |||||||||
E | CL-12-P | €49.20 | |||||||||
C | CL-9-A | €19.18 | |||||||||
D | CL-9-SS | €38.26 | |||||||||
B | CL-9-F | €15.67 | |||||||||
E | CL-16-P | €51.51 | |||||||||
A | CL-16-ST | €130.07 | |||||||||
C | CL-15-A | €26.25 | |||||||||
B | CL-15-F | €20.98 | |||||||||
D | CL-15-SS | €61.19 | |||||||||
C | CL-16-A | €24.57 | |||||||||
B | CL-16-F | €22.27 | |||||||||
D | CL-16-SS | €56.38 | |||||||||
C | CL-8-A | €13.82 | |||||||||
A | CL-8-ST | €67.77 | |||||||||
B | CL-8-F | €11.97 | |||||||||
D | CL-8-SS | €34.27 | |||||||||
B | CL-11-F | €16.68 |
Shaft Collars
Raptor Supplies provides a wide range of shaft collars used for positioning devices on medical equipment and holding shaft components, such as bearings, sprockets and pulleys in place, as well as holding up a flag on flag poles. We offer one- / two-piece clamps, quick clamps and set screw / threaded collars from brands, like Boston Gear, Climax Metal Products, Dayton & Ruland Manufacturing Co. Inc.. The setscrew collars from Boston Gear are designed for applications requiring hygienic cleanliness, thereby ideal for use in the food packaging industry with a maximum operating temperature of 800 deg F. These non-magnetic collars come equipped with a standard hollow point setscrew to allow easy inspection of locked parts.
Climax Metal Products manufactures a wide variety of shaft collars compatible with imperial shaft sizes between 1/16 and 6 inches and metric shaft sizes from 2 mm to 80 mm. These shaft collars are made from mild steel / type 303 / 316 stainless steel for maximum shock resistance and are available in non-plated, black oxide and zinc-plated finish options.
Frequently Asked Questions
What are the factors to consider when selecting the right shaft collar for my application?
- Choose between set screw, clamp style and other variations based on the application requirements.
- Select a material that offers the necessary strength, corrosion resistance and durability for the application.
- Opt for coatings or finishes that protect against wear, corrosion or friction.
- Ensure the collar's bore size matches the shaft diameter for proper fit and alignment.
- Look for collars that maintain concentricity to prevent wobbling or misalignment.
- Evaluate the collar's ability to securely hold the shaft under the expected loads and operating conditions.
- Consider factors such as temperature, moisture and exposure to chemicals or contaminants.
How do shaft mounting collars differ from clamp-style collars?
- Set screw collars use a recessed screw to secure onto the shaft material for holding power, which may cause marring on the shaft surface.
- Whereas, clamp-style collars employ compressive forces to lock onto the shaft without causing any damage.
- Clamp-style collars offer the advantages of easy removal, indefinite adjustability and compatibility with virtually any shaft without the risk of damage.
We are here to help!
Looking for a part not listed here?
Explore More
- Flashlights
- Vinyl
- Air Compressor Accessories
- Lab Storage and Transport
- Shipping Supplies
- Microwave Ovens
- Seismic Wedge Anchors
- Ball and Dome Swage Fittings
- Split Bolt Connectors
- Bedpan Washers
- PARKER Male Elbow, 90 Degrees, MNPT, Brass
- WOODHEAD 130050 Series Patch Cord
- LEESON 50 Hertz Motors, Single Phase, Drip Proof, Resilient Base
- EATON C Series Molded Case Circuit Breaker Frames, J Frame
- KOHLER Assemblies
- SQUARE D Standard QO Plug-On Circuit Breakers
- JUSTRITE Mini-Berm Flex Trays
- HONEYWELL Radiator Valves
- SCOTSMAN Transformers
- CHICAGO FAUCETS Hose Assemblies