VESTIL MDS-96-SM Smoker Shelter, Multi Duty, 95-1/2 x 120 x 90-1/16 Inch Size, Blue/White, Steel
Item: AG7WBN
Model: MDS-96-SM
Check Availability
Due to weight and dimension restrictions, please request a shipping quote
€5,498.75 /unit
Request a Quote
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Smoking Shelter |
Bench Material | Wood |
Building Type | Smokers Shelter |
Color | Blue, White |
Depth | 95 1/2" |
Height | 7 1/2 ft. |
Intended Use | Smokers Shelter |
Length | 8 ft. |
Material | Steel |
Primary Material | Metal |
Product Datasheet | vestil-rp-mds-96-sm.pdf |
Roof Gauge | 18 ga. |
Roof Steel Gauge | 18 |
Shield Width | 38" |
Siding Gauge | 28 ga. |
Siding Steel Gauge | 28 |
Snow Load | 45 lbs. per sq. ft. |
Usable Height | 80" |
Usable Length | 75 1/4" |
Usable Width | 109 1/2" |
Width | 10 ft. |
Shipping Info:
Ship weight (kg) | 450 |
Ship height (cm) | 228.6 |
Ship length (cm) | 332.74 |
Ship width (cm) | 91.44 |
HS code | 9406008030 |
Country of Origin | US |
Compatible Accessories:
- Vestil AS-125 and AS-125-4PK Anchor Bolts: They are required for installation in concrete.
Standards and Approvals:
- OSHA
Frequently Asked Questions:
Q. Where should the smoking shelter be located?
A. Smoking shelters must be located far away from public buildings and commercial areas where smoke could not drift into smoke-free zones.
Q. How much snow load can this unit hold?
A. Vestil MDS-96-SM smoker shelter can hold up to 45 lb/sq.ft snow load for maximum protection.
Q. What is the snow holding capacity of this shelter?
A. The steel roof of the shelter can hold snow up to 45 lb/sq.ft.
Q. What tools are required for assembling this shelter?
A.
- Two 9/16 inch wrenches
- 5/16 inch driver for cordless or corded drill
- Bubble level
- 10 ft tape measure
- Vice-grip
Q. How to assemble this Vestil MDS-96-BK bicycle storage shelter?
A.
- Lay out wall supports. The mounting plate's longer sides must be toed-in towards one another.
- Before you begin putting the self-tapping screws (that hold the side walls) to the wall supports, measure 4 inches up from the bottom of the mounting pads.
- Make sure that the screws securing the siding to the frame are facing the bottom side of the wall while installing the centre angle iron rail on the side walls & back wall.
- Using a 4-inch spacer, elevate the back wall panel and attach it to the wall supports.
- Install at least 1-piece bolt with 2 pieces of 3/8 inch washers per support on each side of the mounting pads.
- Insert 1 piece of a 9-inch long spacer for both sides.
- From the front of the shed, lift the opposite side of the roof panel and install it.
- Install bolts and nuts to each side of the roof along with washers (above & below the mounting pad).
- To secure the shed to the ground, use the mount pad holes.
- With 1 self-tapping screw, attach the smoker's rest to the middle back frame of the shed, and repeat on the other side.
- Place the smoker's shield in the shed's front door.
- Use 2 self-tapping screws to secure the top of the smoker's shield to the shed.