ROPER WHITNEY 16 Bench Punch, 3-1/4 Inch Throat, 9/16 Inch Hole
Get it by Jun 10, Monday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Bench Hole Punch |
Capacity of Mild Steel (Gauge) | 9 Ga. |
Function | Punches |
Hole Size | 9/16" |
Hole Size Nominal | 0.563" |
Number of Pins | 0 |
Slug | Falls Free From Die |
Type | Manual |
Shipping Info:
Ship weight (kg) | 13.93 |
Ship height (cm) | 13.21 |
Ship length (cm) | 92.71 |
Ship width (cm) | 27.94 |
HS code | 8205599000 |
Country of Origin | US |
Product Details:
Features:
- Roper Whitney No. 16 bench punch has a maximum rated capacity of 7.3 tons and a throat depth of 3.25 inches.
- It comes with adjustable and removable die shoes, allowing use on different-sized dies.
- This hydraulic Whitney punch is operated using a roller bearing action and comes with a 9/32-inch round punch & die.
- It is heat treated after machining to offer increased hardness depth and can be used with hydraulic drivers.
Compatible Accessories:
- Roper Whitney No.16 Work Table: The surface of this work table measures 6 x 8 inches and features 20 tapped 1/4-inch holes for mounting stops and gauges.
Frequently Asked Questions:
Q. What are the types of punches?
A. Punches fall into two categories: hollow or solid. Hollow punches are made to pierce materials like leather or sheet metal to make a hole. Solid punches are used to make imprints on a workpiece or drive items such as pins.
Q. What is the difference between a dovetail punch and a hollow punch?
A. Dovetail punches are ideal for fabricating interlocked dovetail joints when the outside diameter of the gasket is larger than the width of the material to be cut. These units feature a padded rubber grip to offer maximum comfort during continuous operation. Hollow punches, on the other hand, are ideal for creating single-diameter holes (bolt holes) and dual-diameter rings (washers) in a single operation. They allow quick & precise hole-punching on flange gaskets.
Q. What are centre punches used for?
A. When drilling, the centre of a hole is frequently marked with a spring-loaded centre punch. A centre punch creates a dimple that is big enough to point the drill's tip in the right direction.
Explore Products
- PIP 16-D622/L Hand Protection Cut Resistant Gloves, L, White, Dozen
- MAIN FILTER INC. MF0416114 Hydraulic Filter, Wire Mesh, 60 Micron Rating, Viton Seal, 12.95 Inch Height
- WILTON TOOLS 690502
- RETRACTA-BELT WH412RD15-BL-MM Retractable Belt Barrier, Blue, Red, 15 ft Belt Length
- BALLYMORE DEP7-3672 Rolling Work Platform Steel Dual 70 In.h
- APPLETON ELECTRIC AESS34MS Selector Switch
- BEHRINGER SYSTEMS USBT3075-SP
- OILITE AA1212-03B Sleeve Bearing, Bronze, 1 Inch Bore, 1 1/4 Inch Od, 2 Inch Length
Explore More
- Spring Plungers
- Shutter Motors
- Three Phase Transformers
- Glove Box Gloves
- Stepper Motor Controllers
- Impact Sockets and Bits
- Utility Carts
- Lighting Controls and Control Systems
- Flexible Impeller Pumps
- Assortments
- HONEYWELL Front and Top Opening, 90 Degrees Key DIN Style Dual Entry Safety Interlock Switch
- APPROVED VENDOR Threaded Quick Link
- ASCO VALVES Air and Fuel Gas Solenoid Valve
- LAB SAFETY SUPPLY Sample Bag
- TEXAS PNEUMATIC TOOLS Throttle Valve Balls
- MARTINS INDUSTRIES Stickers
- JOHN STERLING Standard Shelf Brackets
- PROTO Puller Spring Clips
- ENERPAC A Series Hydraulic Manifolds
- SMC VALVES Packing Set
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.