PLAST-O-MATIC GGTS030-PF Gauge Guard With Stainless Steel Gauge, PVDF
Item: CD4JRU
Model: GGTS030-PF
€399.40 /unit
Request a Quote
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Gauge Guard |
Product Details:
Plast-O-Matic GGTS030-PF gauge guard is designed to separate and safeguard pressure or vacuum instruments used on extremely pure or highly corrosive fluid lines. It can be used with liquids like sulphuric acid, caustics, demineralised water and hydrochloric acid.
Features:
- Plast-O-Matic GGTS030-PF gauge guard features a stainless steel hex insert to minimise breakage due to overtightening.
- It does not expose top metal fasteners and reduces system downtime & system failure.
- The robust and flexible diaphragm of the unit acts as a barrier between the instrument and the process fluid.
- To correctly convey the process pressure to the instrument, the internal space on the diaphragm's instrument side needs to be securely filled with an appropriate liquid.
- Its outstanding diaphragm sensitivity to small changes in pressure or vacuum is the consequence of excellent flexing properties and a sizable sensing surface (2.07 square inches).
Standards and Approvals:
- FDA
- CFR
Frequently Asked Questions:
Q. What are the important points to remember while installing a gauge?
A. Any threaded gauge, transducer or a pressure switch can be inserted. However, before assembly, the user-supplied device should be examined for O-ring seal leaks. The gauge will seal on the O-ring if you don't apply a thread sealant or tape on it.
Q. How to install this Plast-O-Matic gauge guard?
A.
- Put the O-ring within the guard. Fill the guard with liquid until it is about halfway up the threads.
- To get rid of bubbles, tilt and gently tap the guard. (A little air that has been trapped is okay.)
- Use as much gas as you can in the gauge. To remove the bubbles, use a tiny wire or needle.
- The gauge should be finger-tightened. Once the gauge bottoms out on the stainless steel insert, formed into the guard body, O-rings should be compressed. Avoid overtightening and 10 to 30 inch pounds (1 to 3 Nm) of torque is sufficient. Tighten the process side to position the gauge so that it faces "Forward."
- Remove the gauge guard from the process side and drain the process fluid if the gauge does not read zero after following the gauge installation method. Hand tighten the gauge to create the seal while applying pressure to the diaphragm.
- Follow the same steps and somewhat forcefully press the diaphragm if the gauge still does not register zero. When the gauge reaches zero, reconnect to the process line.
- Remove any leftovers, then add alcohol to the liquid.
Product Variants
Model | Material | Max. Temp. | Price | |
---|---|---|---|---|
GGTSX1-PV | PVC | 140 Degrees F | €€246.74 | |
GGTS1-PP | Polypropylene | 180 Degrees F | €€270.21 | |
GGTS030-PV | - | - | €243.22 | RFQ
|
GGTS060-PV | - | - | €243.22 | RFQ
|
GGTS100-PV | - | - | €243.22 | RFQ
|
GGTS160-PV | - | - | €243.22 | RFQ
|
GGTS200-PV | - | - | €243.22 | RFQ
|
Explore Products
- TIMKEN NJ2226EMA Cylindrical Roller Radial Bearing, Single Row, 230 mm Diameter
- MARTIN SPROCKET ML-225 x 1 1/4
- FULHAM FHEM12WW Emergency Exit Light 1.15w 5-3/4 Inch Height Led
- BALDOR / DODGE 015400 Elastomeric Coupling, Shaft Size 1.6250 Inch, Rating 5800 Rpm
- ALBION 930CA04201SBG Swivel Plate Caster With Brake 1000 Lb 4 Inch Diameter
- MORSE CUTTING TOOLS 43251 Cutting End Mill, 1/16 x 3/16 x 7/32 x 2Â 1/2 Inch Size, 2 Flute, Double End
- ERICKSON SS200TT10150M Adapt
- DYNABRADE 55853
Explore More
- Foil Tapes
- V-Belts
- Electronic Torque Wrenches
- Brazing Alloys
- Aluminum Foil Sheets
- Exhaust Fans
- Dollies and Movers
- Fixtures
- Ergonomics
- Hazardous Location Fixtures
- KURIYAMA Braided Tubing, Shore A: 73
- BRADY Pipe Marker, Acid
- EXAIR NEMA 12 Cabinet Coolers With Thermostat, 9.75 Inch Length
- HOFFMAN T Series T50 Mid Size Outdoor Air Conditioners
- SPEARS VALVES PVC Class 100 IPS Fabricated Fitting Reducer Couplings, Spigot x Gasket
- SPEARS VALVES PVC 80 PSI PIP Fabricated Fitting Socket x Socket Reducing Couplings
- MASTER LOCK Padlock Key Blank
- CAMPBELL Swivel Self Locking Hooks
- STEARNS BRAKES Brakes/Clutches Assemblies
- BALDOR / DODGE DLEZ, Wide-Slot Takeup, Ball Bearings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
PLAST-O-MATIC GGTS030-PF Gauge Guard With Stainless Steel Gauge, PVDF
€399.40 /unit