MILLER ELECTRIC 951196 S-74s (70 Series) Single-wire Feeder
Get it by Jun 7, Friday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Wire Feeder |
Hz | 50/60 |
Input Voltage | 24 VAC |
Overall Depth | 27" |
Overall Height | 14" |
Overall Width | 12" |
Phase | 1 |
Rated Output | 750A @100% |
Type | Bench |
Wire Size | 0.023-5/64" |
Shipping Info:
Ship weight (kg) | 23.85 |
Ship height (cm) | 73.66 |
Ship length (cm) | 40.64 |
Ship width (cm) | 39.37 |
HS code | 8515800080 |
Country of Origin | US |
Product Details:
Features:
- Miller 70 Series wire feeder unit is available in a dual-wire configuration to have two different wire types readily accessible on a single feeder, eliminating the need for downtime due to changing spools and drive rolls.
- It features a toolless rotatable drive assembly that empowers operators to rotate the drive housing easily, creating a straight path for wire flow and enhancing welding efficiency.
- This Miller Electric 951196 S-74S single-wire feeder unit has a high-torque permanent-magnet motor, sealed ball bearing gear drive and solid-state speed and brake control for minimal maintenance, ensuring a long and trouble-free lifespan.
- It is equipped with an innovative trigger hold, allowing operators to execute extended welds without the continuous need to hold the trigger, significantly reducing operator fatigue.
Frequently Asked Questions:
Q. Can the heater be used in areas with high ceilings?
A. Yes, it can be mounted at heights up to 14 feet.
Q. Can we change the drive of this Miller 70 Series wire feeder unit?
A. It features standard quick-change drive rolls, streamlining the wire changeover process and saving valuable time.
Q. How do you size an electrical feeder?
A. When a feeder is responsible for providing power to continuous loads or a combination of continuous and non-continuous loads, the minimum size of the feeder conductor must have an allowable ampacity that is equal to or greater than the sum of the non-continuous load plus 125 per cent of the continuous load.
Q. How do I choose the wire size for my feeder?
A. When it comes to wire size, there are two key factors to consider: thickness, often referred to as gauge and length. To figure out the appropriate gauge of wire for your needs, you should take into account its carrying capacity and the amount of current it must handle, typically measured in amperage or amps. The wire's gauge is directly linked to its ability to handle the required amperage.
Explore Products
- GORLITZ 695 Electric Plug
- VERMONT GAGE 551120130 HSS +.0003 TOOL BLANK
- PIP 280-HP1491RM-15 Head Protection Hard Hats, OS, Hi-Vis Yellow, Each
- COTTERMAN 4WP2436A3B8AC1P6 Work Platform Rolling Steel 40 Inch Height
- VICKERS 02-317247
- HAM-LET 768L-SS-6MM X 1/8 Connector 316 Stainless Steel Let-lok x M 6mm x 1/8in
- HUBBELL WIRING DEVICE-KELLEMS SNAP5262C2WTRA Straight Receptacle, Controlled, 15A 125V, Nylon, White
- BULLDOG 500339 Swivel Trailer Mount, Round Tube Male Weld-On U-Bracket for 5/8 Inch Pull Pin
Explore More
- Hydraulic Chain Saws and Pruners
- Retrieving Tools
- Solar Panel Mounting Hardware
- Caliper Accessories
- Emergency Shelter Heaters and Air Conditioners
- Cranes and Festoon Equipment
- Couplings Collars and Adapters
- Key Control Identification
- Stock Picking and Putaway Carts
- Emergency Lighting
- EAGLE THERMOPLASTIC Weighing Dish
- DAYTON Bottom Plates
- APPROVED VENDOR Foam Cube Polyether Charcoal
- SHARON PIPING Reducing Coupling
- ACCUFORM SIGNS Caution Label
- DAYTON 600 Series DC Gearmotor
- ARLINGTON INDUSTRIES Liquid Tight Fitting, Zinc
- COOPER B-LINE Flextray Series Under Floor Stands
- ALLEGRO SAFETY Air Lines
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.