GRAINGER 13R522 Piano Box, 60 x 49 x 30 Inch Size, 47.8 cu.ft., Tan, Steel

This piano box has full-width interior shelves to organise and protect tools. Its bi-fold cover opens upwards and folds for unrestricted access. The tan, powder-coated finish protects the unit against corrosion. To install it, you only need a slotted flat blade screwdriver & two 1/2-inch open-end wrenches.

Features:

• This unit comes with recessed side handles for positive gripping (even with gloves) and protection against damage during transport.
• It offers an electrical pass-thru grommet for easy access to the piano box's power cord.
• This piano box features a heavy-duty piano hinge to protect against pry-ins and theft.
• It is integrated with 4-way skids for providing access to the unit from all sides.
• This unit features gas spring guards to prevent shifting loads from damaging gas springs.
• It offers ball stud brackets for added strength and reduced breakage.
• This piano box has a lock system with a 3-point latch and 7-gauge reinforced lock housing.

Frequently Asked Questions:

How do you remove & replace the gas spring on this unit?

A.

• Begin by propping up the cover with a piece of wood.
• Remove the lower ball stud nut after loosening it. Access the ball stud's hex through the slot in the gas spring guard and tighten with one wrench while holding the ball stud with another.
• Insert the screwdriver blade into the notch and under the spring clip to remove the gas spring from the cover ball stud. Pry the clip up until the ball stud is released, then remove the spring.
• To avoid accidental cover closure, double-check the piece of wood support holding the cover.
• Remove the ball stud from the old gas spring and insert it into the lower ball stud connector of the new gas spring.
• Insert the ball stud on the rod end of the gas spring through the gas spring guard from the inside.
• Attach the ball stud. Simply push it into the upper ball stud while supporting the cover with your other hand to connect.

Q. How are casters installed on this unit?

A. It has pre-punched skids that allow easy installation of casters.

Q. What is the height of this piano box?

A. When the unit is open, it has a height of 78 inches. While closed, it has a height of 49 inches.