ENERPAC P801 ULTIMA Steel Hydraulic Hand Pump, 2 Speed, Fibreglass Handle
Get it by Jun 18, Tuesday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Hydraulic Hand Pump |
Cylinder Compatibility | Single Acting |
Dimension A | 16.83" |
Dimension B | 20.12" |
Dimension C | 1.18" |
Dimension D | 1.38" |
Dimension E | 2.17" |
Dimension H | 23.5" |
Dimension J | 18.11" |
Dimension L | 7.65" |
Dimension N | 5.91" |
Dimension P | 4.76" |
Dimension Q | 1.65" |
Dimension S | 0.33" |
Dimension T | 2.93" |
Max. Flow at Rated Pressure | 0.15 cu. in./stroke |
Max. Handle Effort | 77 lbs. |
Max. Operating Pressure | 10000 psi |
Number of Stages | 2 |
Oil Displacement per Stroke 1st Stage | 1 cu. in. |
Oil Displacement per Stroke 2nd Stage | 0.15 cu. in. |
Piston Stroke | 1" |
Power Source | Manual |
Pressure Rating 1st Stage | 500 psi |
Pressure Rating 2nd Stage | 10000 psi |
Product Datasheet | enerpac-p842.pdf |
Reservoir Capacity | 250 cu. in. |
Speed Type | Two Speed |
Usable Oil Capacity | 250 cu. in. |
Valve Operation | Manual |
Shipping Info:
Ship weight (kg) | 15.69 |
Ship height (cm) | 19.43 |
Ship length (cm) | 59.69 |
Ship width (cm) | 17.6 |
HS code | 8413200000 |
Country of Origin | CN |
Product Details:
Features:
- This hand pump features a quick grip handle for easy transportation and a bypass system for enhanced pump efficiency.
- It has a two-speed setting with a 1-inch-long piston stroke to power hydraulic cylinders.
- This hand pump is integrated with a chrome-plated plunger & wiper for wear resistance and a wider base for stability.
- It features steel construction with a vent-free reservoir to eliminate spills, an internal pressure relief valve for overload protection and a non-conductive ergonomic handle for safety.
- This hand pump provides displacement per stroke of 0.99 cubic inches & 0.15 cubic inches in the 1st and 2nd stages, respectively.
Compatible Accessories:
- Enerpac LX101 Hydraulic Oil: This hydraulic oil is used in hydraulic hand pumps for reduced handle effort. It features a zinc lubricant additive which acts as a barrier against moisture to prevent rust formation. This oil comes under the viscosity index of 105 PI.
Frequently Asked Questions:
Q. What is a two stage hand pump?
A. Two stage pumps, such as Enerpac P802 hand pump, are capable of switching two speed configurations depending upon the application requirement. Two stage hand pumps deliver higher flow rates until the cylinder starts working.
Q. How does a hydraulic manual pump work?
A. These hand pumps convert mechanical energy into hydraulic energy using hydraulic fluid under pressure. The pressure is generated by moving the pumps handle.
Q. What is a two stage hand pump?
A. Two stage pumps, such as Enerpac P802 hand pump, are capable of switching two speed configurations depending upon the application requirement. Two stage hand pumps deliver higher flow rates until the cylinder starts working.
Q. How to maintain this hydraulic hand pump?
A. Regular checks of fluid levels, seals and connections should be performed to ensure that the pump is functioning properly.
Q. How does a hydraulic manual pump work?
A. These hand pumps convert mechanical energy into hydraulic energy using hydraulic fluid under pressure. The pressure is generated by moving the pumps handle.
Q. How do I clean and maintain this hydraulic hand pump?
A.
- Perform routine visual inspections to check for any signs of damage, leaks or loose connections.
- Clean the exterior of the pump using a clean cloth or rag to remove dirt, dust or debris.
- Verify that the hydraulic fluid level is within the recommended range, adding or replacing the fluid as needed.
- Inspect and clean or replace the hydraulic fluid filter to prevent contaminants from circulating through the system.
- Apply appropriate lubricant to moving parts, such as the handle, to ensure smooth operation and prevent corrosion.
- Store the pump in a clean, dry and secure area to protect it from environmental elements when not in use.
Q. What factors should be considered while choosing a hydraulic pump?
A.
- Consider the required flow rate, pressure range and power capabilities.
- Evaluate factors like fluid type, temperature and environmental conditions.
- Select the appropriate pump type, such as gear, vane or piston.
- Assess the pump's efficiency to minimise energy consumption.
- Choose a pump from a reputable manufacturer known for reliability and durability.
Q. What is the maximum operating pressure and oil capacity of this Enerpac P801 Ultima hydraulic hand pump?
A. Enerpac P801 Ultima hydraulic hand pump can be operated at pressures up to 10000 psi and usable oil capacities up to 250 cubic inches.
Documentation:
Product Variants
Model | Dimension Q | Dimension G | Cylinder Compatibility | Dimension B | Dimension C | Dimension D | Dimension E | Dimension F | Price | |
---|---|---|---|---|---|---|---|---|---|---|
P141 | - | 1/4"-18 NPTF | Single Acting | 13.25" | 1.13" | 3.37" | 1.13" | - | €€680.99 | |
P18 | - | - | Single Acting | 12.44" | 1.18" | 1.38" | 1.48" | - | €€982.74 | |
P392ALSS | - | - | Single Acting | - | - | - | - | - | €€1,243.12 | |
P802 | 1.4" | 3/8"-18 NPTF | Single Acting | 21.75" | 1.78" | 5.25" | 1.39" | - | €€1,649.11 | |
P202 | - | 1/4"-18 NPTF | Single Acting | 20.06" | 1.44" | 3.37" | 1.13" | - | €€777.55 | |
P391 | - | 3/8"-18 NPTF | Single Acting | 21" | 1.44" | 3.93" | 1.31" | - | €€872.03 | |
P464 | 3.5" | - | Double Acting | 12.13" | 6.42" | 12.63" | 7.68" | - | €€4,846.96 |
Explore Products
- ZOELLER 289-0018
- FEIN POWER TOOLS MCCS14 Chop Saw 14 Inch 15A
- TENNSCO BS5-151512-C Box Locker, 5 Tier, 3 Opening, 15 x 15 x 12 Inch Size
- MORSE CUTTING TOOLS 60332 Jobber, 10.1 mm Size
- MAIN FILTER INC. MF0061270 Interchange Hydraulic Filter, Glass, 25 Micron, Viton Seal, 4.44 Inch Height
- INGERSOLL-RAND SB20A-AAS-T
- CEMENTEX USA BPK-CUL40COPKF-S2 Coat And Overpant Kit, With Hood Vent, 40 Cal., S Size, Class 2
Explore More
- Abrasive Cut-Off and Chop Wheels
- Mounted Linear Bearings
- Sanding Disc Kits
- Document and Poster Frames
- Plumbed Emergency Eyewash and Shower Water Heaters
- Demolition Tools and Equipment
- Workbenches and Accessories
- Terminal Blocks
- Ventilation
- Spacers and Standoffs
- APPLETON ELECTRIC Front Cover
- IRSG Merchandise Cart
- BRADY Danger Bilingual Tag, Cardstock, 7" x 4"
- SCHLAGE Sfic Cylinders 1-3/8 Inch
- RULAND MANUFACTURING Rigid Shaft Couplings
- MARTINS INDUSTRIES Rubber Tyre Conveyors
- EATON Molded Case Circuit Breaker Accessories
- Cementex USA Metric Insulated Sockets, 1/4 Inch Square Drive
- BRADY Desktop Label Printers
- WEG ACW-Series Flange Handles
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.