DAYTON 4UA63 Pump Centrifugal 1/3hp
Item: AD9PXJ
Model: 4UA63
In Stock
Get it by Jun 19, Wednesday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
€716.83 /unit
Add To Cart
Request a Quote
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Centrifugal Pump |
Amps | 7.5/3.8 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 25 @ 32 Ft. |
Best Efficiency Range GPM @ Head | 26-30 GPM @ 30-27 Ft. |
Drain Plug | 1/4"-18 NPT |
Duty | Continuous |
Frame | 56J |
GPM of Water @ 10 Ft. of Head | 42 |
GPM of Water @ 15 Ft. of Head | 40 |
GPM of Water @ 20 Ft. of Head | 37 |
GPM of Water @ 25 Ft. of Head | 33 |
GPM of Water @ 30 Ft. of Head | 26 |
GPM of Water @ 40 Ft. of Head | 4 |
Height | 8" |
Housing Material | Cast-Iron |
HP | 1/3 |
Hz | 60 |
Impeller Material | Cast-Iron |
Impeller Type | Semi Open |
Inlet | 1" |
Inlet Pressure | 100 PSI |
Length | 15.5" |
Max. Case Pressure | 165 PSI |
Max. Dia. Solids | 1/8" |
Max. Fluid Viscosity | 100 SSU |
Max. GPM @ Head | 43 @ 10 Ft. |
Max. Head | 41 ft. |
Max. Liquid Temp. | 200 Degrees F |
Max. Pressure | 17.7 psi |
Max. Specific Gravity | 1.0 |
Min. GPM @ Head | 6 @ 40 Ft. |
Motor Enclosure | ODP |
Motor RPM | 3500 |
Motor Type | Capacitor Start |
NEMA/IEC Frame | 56J |
Outlet | 1" |
Phase | 1 |
Port Rotation | No |
Screw Material | Zinc Plated |
Seal Application | Nonflammable and Nonabrasive Liquids Compatible with Seal Component Materials Up to 180F |
Seal Material | Carbon Ceramic-Buna N |
Seal Type | Mechanical |
Service Factor | 1.75 |
Shaft Material | Stainless Steel |
Suction Lift | 7 Ft. |
Type | Self-Priming |
Voltage | 115/230 |
Volute Material | Cast-Iron |
Wetted Materials | CI, Buna N, Carbon, Ceramic |
Width | 5.62" |
Shipping Info:
Ship weight (kg) | 15.5 |
Ship height (cm) | 20.32 |
Ship length (cm) | 43.43 |
Ship width (cm) | 14.22 |
HS code | 8413702005 |
Country of Origin | IN |