DAYTON 16N196 Bench Drill Press 10 Inch 115v 1/2 Inch
Get it by Jun 7, Friday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Bench Drill Press |
Amps AC | 4.1 |
Base Size | 8-1/4" x 13-1/2" |
Capacity Cast Iron | 1/2" |
Capacity Steel | 3/8" |
Chuck Size | 1/2" |
Column Dia. | 2-9/32" |
Drive Type | Belt |
Hz | 60 |
Max. Spindle To Base | 15-13/16" |
Motor HP | 1/3 |
Number of Speeds | 5 |
Overall Depth | 19.25" |
Overall Height | 27.5" |
Overall Width | 11.25" |
Phase | 1 |
Product Datasheet | dayton-16n196.pdf |
Quill Dia. | 1-1/2" |
Spindle Speed | 650 to 3070 |
Spindle Taper | 33JT |
Spindle to Table | 10-3/4" |
Spindle Travel | 2-1/2" |
Swing | 10" |
Table Slot Size | 9/16" |
Table Work Surface | 7-13/16" x 7-13/16" |
Tilting Angle | 45 Degrees To Left And Right |
Voltage | 120 |
Shipping Info:
Ship weight (kg) | 23.24 |
Ship height (cm) | 69.85 |
Ship length (cm) | 48.9 |
Ship width (cm) | 28.58 |
HS code | 8465950090 |
Country of Origin | CN |
Product Details:
Features:
- Dayton 16N196 bench drill press's worktable can be tilted up to 45 degrees in the right & left directions and swivel up to 360 degrees around the column for precision drilling using the laser alignment, table slots & spindle depth stop.
- It has a rack & pinion table raiser for quick set-ups, installation & operator convenience.
- This drill press has a step pulley and belt drive design for controlling the speed of drilling.
- Its head, table & base are made of durable cast iron and its spindle is supported by high-quality ball bearings.
- The unit is equipped with a front-mounted safety switch and a paddle on / off switch for greater user control.
- Its spindle can swing up to 10 inches and rotate at 5 speeds ranging from 650 to 3070 RPM.
Compatible Accessories:
- Cap Cover & Spring: These covers are used to replace the old, worn-out or damaged parts in this drill press.
Frequently Asked Questions:
Q. What to do in case of drill press failure?
A. Assuming that the drill press is supplied with the correct power supply and is the correct choice for the desired hole size, the first thing to check is the status of the wiring connections. Users should also check & clean dirt or dust accumulated on the motor causing heating up of the motor. Motors, step pulley & belt drive should also be lubricated regularly for smooth operation. Users should take care that they do not run the drilling machines in a workpiece not suitable for drilling according to the product's operating manual. They should also check for wear & tear on the drill press parts.
Q. How is a bench drill press different from a floor drill press?
A. A bench drill press features shorter spindle travel compared to a floor-stand drill press and therefore can create holes in thinner metal workpieces.
Q. What is the voltage & current rating of this Dayton 16N196 bench drill press?
A. Dayton 16N196 bench drill press has a voltage rating of 120VAC & a current rating of 4.1A.
Documentation:
Explore Products
- OETIKER 16700301 Hose Clamp, Band Width 0.35 Inch, Size Range 32.9 mm to 36.1 mm, Pack Of 100
- EATON 1MCB1400RTA600
- GRAINGER 1508-375563-15 Tubing, Tpv, Black, 3/8 Inch Inside Dia, 9/16 Inch Outside Dia, 15 Ft Overall Length
- TECHNIKS 04011-1-17/64 Collet, Round Face, 1-17/64 Inch Size
- GRAINGER 4777_36_0 Grade 2 Titanium Rod, 13/100 Inch Outside Dia, +/-0.005 Inch, 36 Inch Overall Length, B89
- GATES 7253-07045
- OSG 1635018111 Thread Forming Tap, M18X1.5 Thread Size, 25 mm Thread Length, 110 mm Length
- WATTS ARK C400/C500 RT 2 1/2-4 Total Rubber Parts Kit, 2 1/2 To 4 Inch Size
Explore More
- Microwave Ovens
- Trash Bags
- Pitot Tubes
- Mounted Point Kits
- Ribbed Wall Containers
- Cordless Tools
- Cooling Fans and Accessories
- Temperature Controls
- Retail Carts and Trucks
- Noise Control
- GEORG FISCHER PVC Pipe
- AKRO-MILS Card Stock Holders
- WESCO 2-in-1 Industrial Steel Hand Trucks
- WIREMOLD Raceways and Accessories
- COOPER B-LINE Box Support Brackets
- VERMONT GAGE Go Standard Thread Plug Gages, 11/16-24 Unef
- LINN GEAR 830 Series LSB Sprockets
- SLOAN Faucet Assemblies
- BOSTON GEAR 16 Diametral Pitch Steel Unhardened Worms
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.