EATON Bulk Hoses
Eaton bulk hoses are used in water treatment plants and oil, gas & chemical industries to transfer large-volume fluids such as oils, gases, water, cement and abrasive materials over a long distance.
Filter
Safety Factor: 4:1 , Type: Hydraulic
Style | Model | Hose Length | Reinforcement | Cover Material | Hose Outside Dia. | Min. Bend Radius | Operating Pressure | Dash Size | Temp. Range | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | FC300-10-25 | 25ft. | Single Wire Braid | Blue Polyester Braid | 0.93" | 5-1/2" | 1750 psi | 10 | -55 To 302 F | €999.63 | |
A | FC300-05-25 | 25ft. | Single Wire Braid | Blue Polyester Braid | 0.58" | 3-3/8" | 3000 psi | 5 | -55 To 302 F | €669.55 | |
A | FC300-12-25 | 25ft. | Single Wire Braid | Blue Polyester Braid | 1.08" | 6-1/2" | 1500 psi | 12 | -55 To 302 F | €942.93 | |
A | FC300-16-25 | 25ft. | Single Wire Braid | Blue Polyester Braid | 1.27" | 7-3/8" | 800 PSI | 16 | -55 To 302 F | €1,298.56 | |
A | FC300-20-25 | 25ft. | Single Wire Braid | Blue Polyester Braid | 1.5" | 9" | 625 PSI | 20 | -55 To 302 F | €1,595.11 | |
B | GH793-4-50 | 50ft. | 2 Wire Braid | Synthetic Rubber | 0.6" | 4" | 5800 PSI | 4 | -40 To 212 F | €669.47 | |
B | GH793-8-50 | 50ft. | 2 Wire Braid | Synthetic Rubber | 0.87" | 7" | 4250 PSI | 8 | -40 To 212 F | €863.78 | |
B | GH793-10-50 | 50ft. | 2 Wire Braid | Synthetic Rubber | 0.98" | 8" | 3625 PSI | 10 | -40 To 212 F | €1,098.06 | |
B | GH793-12-50 | 50ft. | 2 Wire Braid | Synthetic Rubber | 1.16" | 9-1/2" | 3125 PSI | 12 | -40 To 212 F | €1,378.48 | |
B | GH793-16-50 | 50ft. | 2 Wire Braid | Synthetic Rubber | 1.5" | 12" | 2500 psi | 16 | -40 To 212 F | €1,747.06 |
Features
- Eaton FC300 Series bulk hoses have polyethylene tubes for corrosion resistance on exposed surfaces. These bulk hoses can be operated at temperatures ranging from -55 to 212 degrees F. They are reinforced using polyester and wires for increased toughness and structural rigidity. These bulk hoses have blue polyester braided covers for durability and excellent abrasion resistance.
- Eaton GH793 Series bulk hoses have synthetic rubber tubes for durability and resisting corrosion on exposed surfaces. These bulk hoses are reinforced with 2 wire braids to withstand high working pressures. They have operating temperatures ranging from -40 to 260 degrees F and come equipped with PVC / nitrile blend covers for leakproof operations.
Standards and Approvals
- ABS
- SAE J1402
- SAE J1019
- SAE 100R5
- DNV
- DOT FMVSS 106
- USCG
- MSHA
- SAE 100R2AT Type S
- EN853 2SN
- ISO 1436-1 Type 2SN
Frequently Asked Questions
What is the maximum working pressure required for band clamp fittings in Eaton FC300 bulk hoses?
50 psi.
What is the operating pressure range of these bulk hoses?
625 to 5800 psi.
What is the significance of transfer tape in these hoses?
Transfer tapes are used as a lay line style in these bulk hoses to resist UV rays and high / low temperatures.
We are here to help!
Looking for a part not listed here?
Explore More
- Motor Mounting Brackets
- Signal Conditioner
- Electric Shears
- Hydraulic Piston Pumps
- Wire Terminal Kits
- Sinks and Fountains
- Sockets and Bits
- Terminal Blocks
- Automotive Interior
- Dock Equipment
- ELECTRIC MOTORS & SPECIALTIES Cast Iron Frame Rear/Foot Mounting Unit Bearing Motors
- APPROVED VENDOR Burette Glass 25ml.grade
- VERMONT GAGE Go/NoGo Standard Thread Plug Gages, 5-44 Unf Lh
- EATON Smartwire-DT Series Contactor Modules
- MI-T-M Unions
- DAYTON Swivel Casters
- SPEEDAIRE Needle Holders
- RINGERS GLOVES Increased Visibility Traffic Control Gloves
- BOSTON GEAR 20 Diametral Pitch Cast Iron Stem Pinions
- REED INSTRUMENTS Insulation Testers