DAYTON Submersible Sewage Pumps


Filter
Agency Compliance: CUS , Bearing Type: Ball , GPM of Water @ 70 Ft. of Head: 25 , Mechanical Seal: Silicon, Viton
StyleModelGPM of Water @ 60 Ft. of HeadGPM of Water @ 25 Ft. of HeadAmpsCord LengthDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadPrice (ex. VAT)
A
2JGA6
-739.220ft.9.25"12610896€1,062.63
B
3BB87
-51220ft.10.75"957040€971.44
B
3BB89
--6.220ft.10.75"1178545€1,278.71
C
3BB96
-25012.9, 6.120ft.17"--300€4,523.96
D
4CRE5
--10.525ft.10 27/32"1008033€1,569.67
A
2JGA4
-281120ft.9.25"756047€768.78
E
2JGA5
-4212.320ft.9.25"806755€2,066.69
A
2JGA7
-722.620ft.9.25"1129886€1,181.47
B
3BB88
--1220ft.10.75"1178545€1,204.91
F
3BB90
-11710.720ft.12.625"--137€1,884.20
G
3BB93
-1177.520ft.12.625"--137€1,997.51
D
4CRE4
--9.525ft.10 27/32"6040-€947.67
F
3BB91
301601520ft.12.625"--172€2,755.30
H
5RZP1
6040023.6/11.820ft.16.75"-490450€7,270.99
G
3BB95
651551220ft.12.625"--165€2,912.22

Submersible Sewage Pumps

Dayton sewage / trash centrifugal pumps are manufactured for transporting sewage & untreated wastewater from a sewage basin to a septic tank or sewer system. These sewage pumps easily mount in a basin where waste gathers from drain pipes and are turned on and off by a connected control panel or a switch. The components of these pumps are made from carbon, ceramic, Buna-N and stainless steel for chemical resistance. Choose from a range of these submersible sewage pumps, available in 2.6, 6.2, 7.5, 9.2 and 9.5 amps current variants.

We are here to help!

Looking for a part not listed here?