Versand info@raptorsupplies.com WhatsApp +44 203 287 5224

DAYTON Turbine Pumps, 3 HP


Filter
DAYTON 4UP62A
Amps: 8.3-7.6/3.8 , Bearing Type: Sealed Ball Bearing (Motor Bearing) , Drain Plug: 180 From Inlet Port , Duty: Continuous , Frame: 56C , Height: 8.375" , Housing Material: Cast iron , HP: 3 , Impeller Material: Bronze , Impeller Type: Regenerative Turbine , Inlet Pressure: 200 PSI , Max. Case Pressure: 300 PSI , Max. Dia. Solids: 25 Microns , Max. Fluid Viscosity: 250 SSU , Max. Pressure: 300 psi , Max. Specific Gravity: 1.00 SP , Motor Enclosure: TEFC , NEMA/IEC Frame: 56C , Outlet: 1" , Phase: 3 , Port Rotation: 90 Increments , Screw Material: Steel , Seal Application: Low Flow, High Head , Seal Material: Carbon, Ceramic, Buna , Seal Type: Type 21 , Voltage: 208-230/460 , Volute Material: Cast-Iron, Bronze Fitted , Width: 8.38"
StyleModelLengthMotor TypeBest Efficiency GPM @ HeadMax. Liquid Temp.Best Efficiency Range GPM @ HeadWetted MaterialsConstructionGPM @ 20 PSIPrice (ex. VAT)
A
4UP62		16 13/16"3-Phase, TEFC20.6 GPM @ 120 PSI-20 to 230 F20.6-24.0 GPM @ 120-43 PSICast Iron, Bronze FittedBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve25.0€3,571.96
A
4UP60		16 13/16"3-Phase, TEFC13.0 GPM @ 130 Ft.-20 to 230 F11.5-15.0 GPM @ 170-150 PSICast Iron, Bronze FittedBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve, TEFC Motors16.7€3,565.10
A
4UP64		16 13/16"3-Phase27 GPM @ 80 PSI230 F27.0-29.5 GPM @ 80-43 PSICI, Bronze FittedBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve31.2€3,392.08
A
4UP57		16.75"3-Phase, TEFC15.5 GPM @ 70 PSI-20 to 230 F10.0-19.0 GPM @ 147-35 PSICast Iron, Bronze FittedBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve20.0€3,217.70

Turbine Pumps, 3 HP

Dayton 3 hp turbine pumps are suitable for boiler feeds, water treatment plants, reverse osmosis filtration, spray equipment and liquid transfer applications. These pumps are equipped with sealed ball bearings for low rotational friction and feature TEFC / ODP enclosures to prevent overheating & ingress of dust into the motor. They provide flow rates up to 31.2 gpm at 20 psi and are capable of withstanding liquid temperatures up to 230 degrees F. Choose from a wide range of these turbine pumps, available in 1 & 3 phase configurations.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More