DAYTON Pedestal Pumps, Centrifugal


Filter
Bearing Type: Ball , Drain Plug: Easily Accessible , Duty: Continuous , Impeller Type: Semi Open , Inlet Pressure: 200 PSI , Max. Case Pressure: 200 PSI , Max. Fluid Viscosity: 100 SSU , Max. Liquid Temp.: 200 F , Max. Specific Gravity: 1.0 , Port Rotation: 4 Position , Seal Application: Long life When not Run Dry or Pumping Abrasives , Seal Type: Mechanical Carbon on Ceramic , Shaft Material: Stainless Steel , Type: Centrifugal
StyleModelImpeller MaterialGPM of Water @ 50 Ft. of HeadBest Efficiency GPM @ HeadGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 30 Ft. of HeadGPM of Water @ 40 Ft. of HeadPrice (ex. VAT)
A
2ZWY5
Bronze6472 @ 44 Ft.1151101049481€873.23
A
2ZWY2
Bronze-38 @ 27 Ft.6762574010€766.94
A
2ZWY7
Bronze110119 @ 57 Ft.170166162146130€1,458.42
A
2ZWY6
Bronze6870 @ 52 Ft.1221151099884€816.66
A
2ZWY3
Bronze2247 @ 36 Ft.7268635341€803.50
A
2ZWY1
Bronze-30 @ 26 Ft.4137342510€647.54
B
2ZWX5
Cast-Iron2247 @ 36 Ft.7268635341€583.45
B
2ZWX3
Cast-Iron-30 @ 26 Ft.4137342510€477.23
B
2ZWX9
Cast-Iron110119 @ 57 Ft.170166162146130€327.47
B
2ZWX8
Cast-Iron6870 @ 52 Ft.1221151099884€813.12
B
2ZWX7
Cast-Iron6472 @ 44 Ft.1151101049481€608.25
B
2ZWX6
Cast-Iron2975 @ 38 Ft.8882776450€604.79
C
2ZWY8
Stainless Steel-30 @ 26 Ft.4137342510€869.82
D
2ZWY9
Stainless Steel-38 @ 27 Ft.6762574010€304.54
D
2ZWZ1
Stainless Steel2247 @ 36 Ft.7268635341€922.03
D
2ZWZ2
Stainless Steel2975 @ 38 Ft.8882776450€975.19
D
2ZWZ3
Stainless Steel6472 @ 44 Ft.1151101049481€1,046.89
D
2ZWZ4
Stainless Steel6870 @ 52 Ft.1221151099884€992.20
D
2ZWZ5
Stainless Steel110119 @ 57 Ft.170166162146130€1,787.93

Pedestal Pumps, Centrifugal

Dayton centrifugal pedestal pumps are designed to continuously pump and produce high flow rates under low-head conditions. These pumps feature wetted materials, constructed of Buna-N, carbon, cast iron, ceramic, stainless steel to handle non-flammable and non-abrasive liquids. They further feture Buna-N seal to provide excellent resistance to oils, solvents, gasoline & petroleum-based fluids. These units are equipped with ball bearings for smooth operation, friction reduction and providing equal load-carrying capacity. Choose from a wide range of pedestal pumps, available in heights ranging from 6.3 to 7.2 inches on Raptor Supplies.

We are here to help!

Looking for a part not listed here?