DAYTON Inline Blowers Without Drive Packages, Centrifugal


Filter
Housing Material: Galvanized Steel , Max. Inlet Temp.: 160 Deg.F , Mounting Position: Vertical/ Horizontal , Wheel Material: Aluminum , Wheel Type: Centrifugal Backward Inclined
StyleModelOutlet Dia.Shaft Dia.Bearing TypeOutlet HeightOutlet WidthHeightWheel DiameterWidthPrice (ex. VAT)
A
10C390
9-3/8"3/4"Sealed Pillow Block17.875"17.875"21"13 1/2"21"€2,237.89
A
10C389
9-3/8"3/4"Sealed Pillow Block17.875"17.875"21"13 1/2"21"€2,241.61
A
10C391
10-5/8"3/4"Regreasable Pillow Block19.875"19.875"23"14"23"€2,572.51
A
10C392
11-7/8"1"Regreasable Pillow Block22.875"22.875"26"16"26"€2,619.34
A
10C393
13-1/4"1"Regreasable Pillow Block23.875"23.875"28"18"28"€3,374.89
A
10C394
17-1/2"1"Regreasable Pillow Block34.875"34.875"39"24"39"€6,091.27
A
10C395
30-3/8"1-1/4"Regreasable Pillow Block43.875"43.875"58"42 1/2"58"€11,843.71

Inline Blowers Without Drive Packages, Centrifugal

Dayton inline blowers mount vertically or horizontally inside the ducts to ventilate, intake, exhaust and make-up air in industrial and commercial applications. These blowers have galvanised steel housing with an aluminium wheel for corrosion resistance, durability and withstanding a maximum inlet temperature of 160 degrees F. These blowers feature collars for simple duct connections, sealed / greasable pillow block bearings for load support to a rotating shaft and access panels on each side of the blowers for quick access to internal components. They come without assembled drive packages for customising the blowers according to specific applications. Choose from a wide range of these inline blowers, available in wheel diameters ranging from 13-1/2 to 42-1/2 inches.

We are here to help!

Looking for a part not listed here?