DAYTON DC Gearmotors, Permanent Magnet Motor Design
Style | Model | RPM Range | Max. Torque | Bearings | Gear Ratio | Gear Type | Input HP | Length Less Shaft | Lubrication | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 6Z910 | 0 to 15 | 100 in.-lb. | Needle on Case Output Shaft, Ball on Motor | 702:1 | 1st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur | 1/40 | 7.375" | Permanent Heavy Fluid Gear Oil | €672.25 | |
B | 4ZJ45 | 0 to 15 | 310.0 in.-lb. | Needle with Thrust Ball on Output Shaft, Ball on Motor | 216:1 | Hardened Steel | 1/8 | 10.375" | Permanent Heavy Fluid Gear Oil | €900.12 | |
C | 1LPY2 | 16 to 30 | 156.0 in.-lb. | Ball and Needle on Case, Ball on Motor | 55:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/10 | 8.875" | Grease Filled | €759.85 | |
B | 4ZJ46 | 16 to 30 | 254.0 in.-lb. | Needle with Thrust Ball on Output Shaft, Ball on Motor | 88:1 | Hardened Steel | 1/8 | 10.375" | Permanent Heavy Fluid Gear Oil | €891.51 | |
C | 1LPY1 | 31 to 50 | 105.0 in.-lb. | Ball and Needle on Case, Ball on Motor | 37:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/10 | 8.875" | Grease Filled | €799.10 | |
D | 6Z409 | 31 to 50 | 353.0 in.-lb. | Heavy Duty Ball and Thrust Balls on Case, Ball on Motor | 41:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/4 | 11.75" | Permanent Heavy Fluid Gear Oil | €1,485.01 | |
D | 6Z410 | 51 to 75 | 238.0 in.-lb. | Heavy Duty Ball and Thrust Balls on Case, Ball on Motor | 28:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/4 | 11.75" | Permanent Heavy Fluid Gear Oil | €1,433.76 | |
B | 4ZJ47 | 51 to 75 | 113.0 in.-lb. | Needle with Thrust Ball on Output Shaft, Ball on Motor | 28:1 | Hardened Steel | 1/8 | 10.375" | Permanent Heavy Fluid Gear Oil | €897.50 | |
D | 6Z411 | 76 to 100 | 152.0 in.-lb. | Heavy Duty Ball and Thrust Balls on Case, Ball on Motor | 19:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/4 | 11.75" | Permanent Heavy Fluid Gear Oil | €1,653.38 | |
D | 6Z412 | 100 to 150 | 101.0 in.-lb. | Heavy Duty Ball and Thrust Balls on Case, Ball on Motor | 12:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/4 | 11.75" | Permanent Heavy Fluid Gear Oil | €1,316.06 | |
B | 4ZJ48 | 100 to 150 | 60.0 in.-lb. | Needle with Thrust Ball on Output Shaft, Ball on Motor | 15:1 | Hardened Steel | 1/8 | 10.375" | Permanent Heavy Fluid Gear Oil | €878.57 | |
C | 1LPX8 | 151 to 200 | 30.0 in.-lb. | Ball and Needle on Case, Ball on Motor | 10:1 | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur | 1/10 | 8.875" | Grease Filled | €686.85 |
DC Gearmotors, Permanent Magnet Motor Design
Dayton DC gearmotors use DC power source to provide high torque and variable speed control, especially where space & power are limited. These units feature parallel shaft orientation to choose the ratio & torque required for specific operations, such as conveyor systems, wheel chairs, hospital beds, table lifts and power seats. They consist of a motor, gear and bearings to smoothly change the direction at low speeds and handle sudden stops, without causing wear to the moving parts. These gearmotors also feature TENV (totally enclosed non-ventilated) enclosures to restrict circulation of outside air and contaminants and can be easily mounted in small spaces in multiple positions. Choose from a wide range of these DC gearmotors, available in 1/8, 1/4 and 1/10 hp motor power ratings.
We are here to help!
Looking for a part not listed here?
Explore More
- Electric Polishers And Buffers
- Stainless Steel Butt Weld Pipe Fittings
- Wood Gate Hardware
- Pipe Fitting Insulation
- Cast Manhole Sleeve Lifters
- Storage Bins and Containers
- Sprayers and Spreaders
- Roof Ventilators
- Braces and Brackets
- Nuts
- GENERAL ELECTRIC Starter Control Kits
- APPROVED VENDOR Coated Beaker Tongs
- AMERICRAFT MANUFACTURING Damper Section
- COOPER B-LINE B149 Series Two Hole Open Angles
- APOLLO VALVES YCF Series Cast Iron Wye Strainers
- HUMBOLDT Electrical Density Gauges
- LOVEJOY Grooved Companion Sheaves, Imperial
- ALLEGRO SAFETY DC Air Bags, 12 Inch
- VESTIL BTA Series Aluminium Truck Dock Boards, 12000 lbs.
- BALDOR / DODGE SCBED, Two-Bolt Pillow Block, Ball Bearings