DAYTON Belt Drive Blowers, 15-1/16 Inch, Single Inlet
Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , Discharge Height (In.): 15-13/16 , Discharge Width (In.): 12.5 , Housing Finish: Galvanized , Housing Height: 24.187" , Housing Length: 22.5" , Housing Material: Galvanized Steel , Housing Width: 12.5" , Inlet Dia.: 14-3/4" , Max. Ambient Temp.: 104 F , Max. Blower RPM: 740 , Max. Inlet Temp.: 150 Deg.F , Motor Enclosure: TEFC , Mounting Position: Blower Shaft Horizontal , Shaft Dia.: 1" , Wheel Diameter: 15 1/16" , Wheel Material: Steel , Wheel Width: 9"
Style | Model | Phase | Hz | Blower RPM | CFM @ 0.250-In. SP | CFM @ 0.500-In. SP | CFM @ 0.750-In. SP | CFM @ 1.000-In. SP | Full Load Amps | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 7J559 | 1 | 60 | 540 | 2780 | 1990 | - | - | 14.0/7.0 | €2,352.57 | |
A | 7J560 | 1 | 60 | 740 | 4290 | 3880 | 3230 | 2520 | 18.8/9.4 | €2,445.87 | |
A | 7J583 | 1 | 60 | 540 | 2780 | 1990 | - | - | 14.0/7.0 | €2,568.05 | |
A | 7J584 | 1 | 60 | 740 | 4290 | 3880 | 3230 | 2520 | 18.8/9.4 | €2,661.35 | |
A | 7J563 | 3 | 50/60 | 540 | 2780 | 1990 | - | - | 3.4-3.6/1.8 | €2,342.20 | |
A | 7J564 | 3 | 50/60 | 590 | 3330 | 2520 | 1620 | - | 3.2-3.2/1.6 | €2,796.53 | |
A | 7J565 | 3 | 50/60 | 665 | 3840 | 3230 | 2420 | 1820 | 4.6-4.8/2.4 | €2,817.05 | |
A | 7J566 | 3 | 50/60 | 740 | 4290 | 3880 | 3230 | 2520 | 6.0-5.8/2.9 | €2,535.84 | |
A | 7J600 | 3 | 50/60 | 540 | 2780 | 1990 | - | - | 3.4-3.6/1.8 | €2,557.68 | |
A | 7J601 | 3 | 50/60 | 590 | 3330 | 2520 | 1620 | - | 3.2-3.2/1.6 | €3,012.01 | |
A | 7J602 | 3 | 50/60 | 665 | 3840 | 3230 | 2420 | 1820 | 4.6-4.8/2.4 | €3,032.52 | |
A | 7J603 | 3 | 50/60 | 740 | 4290 | 3880 | 3230 | 2520 | 6.0-5.8/2.9 | €2,751.32 |
Belt Drive Blowers, 15-1/16 Inch, Single Inlet
Dayton square housing blowers are manufactured to generate high-flow air stream for quickly drying wet carpets, upholstery, hard surface floors, walls & ceilings. These blowers have galvanised steel housing and steel wheels, providing strength, corrosion resistance and durability. Single air inlet pull air from one side of the blower housing and belt drive design offers flexibility in terms of rpm speeds. Choose from a wide range of these single inlet, forward curve blowers, available in 1 and 3 phase motor variants.
We are here to help!
Looking for a part not listed here?
Explore More
- Ring Exhaust Fans
- Detent Lock Pop and Plunger Pins
- Chemical Test Strips
- Handles and Pulls
- Drill Accessories-Quick Change Systems
- Equipment
- Respiratory
- Mobile Bin Carts and Workstations
- Caulks and Sealants
- Specialty Paints Coatings and Additives
- GASCO Carrying Case
- APPROVED VENDOR A Adapter, Male Adapter x FNPT, 316 Stainless Steel
- WESTWARD Impact Socket 3/8in Drive 6 Point
- OSG Exocarb Aero Rougher Carbide End Mill
- BUSSMANN CIF06 Series British and IEC Fuses
- VESTIL AC Series Rubber Wheel Chocks
- SLOAN Bonnets
- BALDOR / DODGE SCMED, Piloted Flange, Ball Bearings
- GROVE GEAR GR Series, B-D Style, 852 Size, Ironman Worm Gear Reducers