DAYTON 101 Series DC Gearmotors, TENV, 90VDC
Filter
Bearings: Needle on Case Output Shaft, Ball on Motor , Brushes: Externally Replaceable , Enclosure: TENV , Gear Case: Die Cast Aluminum , Gear Material: 1st Stage Steel Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur , Gear Type: Helical and Spur , Housing Material: Die Cast Aluminum , Lubrication: Permanent Heavy Fluid Gear Oil , Max. Ambient Temp.: 40 Degrees C , Motor Type: DC , Mounting: All Position , Overhung Load: 90 lb. , Replacement Brushes: 6YHY3 , Reversible Shaft Output: No , Rotation: Reversible , Seals: Spring Loaded Lip Type on Input and Output Shaft , Shaft Orientation: Parallel , Thermal Protection: None , Voltage: 90 VDC
Style | Model | RPM Range | Full Load Amps | Gear Ratio | Input HP | Length Less Shaft | Max. Torque | Nameplate RPM | Overall Length | Price (ex. VAT) | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 6Z911 | 0 to 15 | 0.36 | 362:1 | 1/40 | 7.375" | 100 in.-lb. | 5 | 8.375" | €657.26 | |
A | 6Z912 | 0 to 15 | 0.36 | 186:1 | 1/40 | 7.375" | 100 in.-lb. | 9.6 | 8.375" | €649.10 | |
A | 6Z913 | 16 to 30 | 0.62 | 96:1 | 1/20 | 7.5" | 100 in.-lb. | 20 | 8.5" | €652.04 | |
A | 6Z914 | 31 to 50 | 0.62 | 49:1 | 1/20 | 7.5" | 74 in.-lb. | 37 | 8.5" | €627.21 | |
A | 6Z915 | 51 to 75 | 0.62 | 25:1 | 1/20 | 7.5" | 40 in.-lb. | 71 | 8.5" | €697.20 | |
A | 6Z916 | 100 to 150 | 0.62 | 13:1 | 1/20 | 7.5" | 20 in.-lb. | 139 | 8.5" | €688.18 |
101 Series DC Gearmotors, TENV, 90VDC
Dayton 101 Series DC gearmotors provide desired ratio and torque to run an equipment with gear mechanism. These 90VDC rated gearmotors are ideal for running wheelchairs, hospital beds, table lifts and power seats. They consist of a motor, steel gears and bearings w/ die-cast aluminium TENV housing. The permanent magnet parallel shaft features ball bearings for smooth operation in both clockwise and anti-clockwise directions. They are permanently lubricated with fluid gear oil to prevent friction and damage to components. Spring-loaded lip sealing prevents ingress of contaminants. Choose from a wide range of these 101 Series gearmotors, available in 1/40 and 1/20 HP input power ratings on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Legend Plates
- Floor Grinder Accessories
- Swivel Joints
- Adhesion Testers
- Built-in Locker Locks
- Structures
- Sprayers and Spreaders
- Arc Welders and Plasma Cutter Consumables and Accessories
- Automotive Exterior
- Welding Rods and Wire
- WILKERSON General Purpose Jumbo Air Line Filter
- PARKER Relief Valves, Direct Acting Differential Area
- GLOBE SCIENTIFIC Microscope Slide Box, Gray
- HOFFMAN Syspend Series VHD Motion Arm Post Mount Adapters
- BANJO FITTINGS Pipe Plugs
- WATTS LF909 Series Reduced Pressure Zone Assemblies
- VESTIL CLB Series Clearance Bars
- BROWNING 8065 Type Taper Bore Bushings
- BROWNING Q-D Sheaves For 3V Belts